|\^/| Maple 12 (IBM INTEL LINUX)
._|\| |/|_. Copyright (c) Maplesoft, a division of Waterloo Maple Inc. 2008
\ MAPLE / All rights reserved. Maple is a trademark of
<____ ____> Waterloo Maple Inc.
| Type ? for help.
> #BEGIN OUTFILE1
>
> # Begin Function number 3
> display_alot := proc(iter)
> global
> DEBUGMASSIVE,
> DEBUGL,
> INFO,
> ALWAYS,
> glob_iolevel,
> glob_max_terms,
> #Top Generate Globals Decl
> glob_log10abserr,
> glob_orig_start_sec,
> glob_optimal_start,
> glob_max_trunc_err,
> glob_log10_abserr,
> hours_in_day,
> glob_start,
> glob_relerr,
> glob_hmin,
> glob_optimal_done,
> glob_subiter_method,
> glob_normmax,
> glob_iter,
> glob_current_iter,
> glob_no_eqs,
> glob_abserr,
> glob_good_digits,
> glob_curr_iter_when_opt,
> glob_smallish_float,
> glob_last_good_h,
> glob_h,
> glob_disp_incr,
> glob_reached_optimal_h,
> glob_dump,
> glob_html_log,
> glob_optimal_expect_sec,
> glob_warned,
> glob_unchanged_h_cnt,
> glob_hmin_init,
> glob_clock_sec,
> djd_debug2,
> glob_max_sec,
> glob_log10_relerr,
> glob_not_yet_finished,
> sec_in_minute,
> glob_log10normmin,
> glob_log10relerr,
> glob_dump_analytic,
> glob_hmax,
> glob_not_yet_start_msg,
> glob_small_float,
> glob_clock_start_sec,
> glob_display_flag,
> glob_max_minutes,
> glob_warned2,
> glob_optimal_clock_start_sec,
> glob_max_rel_trunc_err,
> glob_max_hours,
> glob_large_float,
> centuries_in_millinium,
> years_in_century,
> days_in_year,
> min_in_hour,
> djd_debug,
> glob_max_iter,
> glob_look_poles,
> glob_percent_done,
> MAX_UNCHANGED,
> glob_initial_pass,
> glob_almost_1,
> glob_max_opt_iter,
> #Bottom Generate Globals Decl
> #BEGIN CONST
> array_const_1,
> array_const_0D3,
> array_const_0D2,
> array_const_0D1,
> array_const_0D0,
> #END CONST
> array_y,
> array_x,
> array_m1,
> array_last_rel_error,
> array_1st_rel_error,
> array_pole,
> array_fact_1,
> array_type_pole,
> array_y_init,
> array_tmp0,
> array_tmp1,
> array_tmp2,
> array_tmp3,
> array_tmp4,
> array_tmp5,
> array_tmp6,
> array_norms,
> array_poles,
> array_y_higher,
> array_y_higher_work2,
> array_complex_pole,
> array_fact_2,
> array_y_set_initial,
> array_y_higher_work,
> array_real_pole,
> glob_last;
>
> local abserr, analytic_val_y, ind_var, numeric_val, relerr, term_no;
>
>
>
>
>
> #TOP DISPLAY ALOT
> if (iter >= 0) then # if number 1
> ind_var := array_x[1];
> omniout_float(ALWAYS,"x[1] ",33,ind_var,20," ");
> analytic_val_y := exact_soln_y(ind_var);
> omniout_float(ALWAYS,"y[1] (analytic) ",33,analytic_val_y,20," ");
> term_no := 1;
> numeric_val := array_y[term_no];
> abserr := omniabs(numeric_val - analytic_val_y);
> omniout_float(ALWAYS,"y[1] (numeric) ",33,numeric_val,20," ");
> if (omniabs(analytic_val_y) <> 0.0) then # if number 2
> relerr := abserr*100.0/omniabs(analytic_val_y);
> if (relerr <> 0.0) then # if number 3
> glob_good_digits := -trunc(log10(relerr/100.0));
> else
> glob_good_digits := Digits;
> fi;# end if 3
> ;
> else
> relerr := -1.0 ;
> glob_good_digits := -1;
> fi;# end if 2
> ;
> if (glob_iter = 1) then # if number 2
> array_1st_rel_error[1] := relerr;
> else
> array_last_rel_error[1] := relerr;
> fi;# end if 2
> ;
> omniout_float(ALWAYS,"absolute error ",4,abserr,20," ");
> omniout_float(ALWAYS,"relative error ",4,relerr,20,"%");
> omniout_int(INFO,"Correct digits ",32,glob_good_digits,4," ")
> ;
> omniout_float(ALWAYS,"h ",4,glob_h,20," ");
> #BOTTOM DISPLAY ALOT
> fi;# end if 1
> ;
>
> # End Function number 3
> end;
display_alot := proc(iter)
local abserr, analytic_val_y, ind_var, numeric_val, relerr, term_no;
global DEBUGMASSIVE, DEBUGL, INFO, ALWAYS, glob_iolevel, glob_max_terms,
glob_log10abserr, glob_orig_start_sec, glob_optimal_start,
glob_max_trunc_err, glob_log10_abserr, hours_in_day, glob_start,
glob_relerr, glob_hmin, glob_optimal_done, glob_subiter_method,
glob_normmax, glob_iter, glob_current_iter, glob_no_eqs, glob_abserr,
glob_good_digits, glob_curr_iter_when_opt, glob_smallish_float,
glob_last_good_h, glob_h, glob_disp_incr, glob_reached_optimal_h, glob_dump,
glob_html_log, glob_optimal_expect_sec, glob_warned, glob_unchanged_h_cnt,
glob_hmin_init, glob_clock_sec, djd_debug2, glob_max_sec, glob_log10_relerr,
glob_not_yet_finished, sec_in_minute, glob_log10normmin, glob_log10relerr,
glob_dump_analytic, glob_hmax, glob_not_yet_start_msg, glob_small_float,
glob_clock_start_sec, glob_display_flag, glob_max_minutes, glob_warned2,
glob_optimal_clock_start_sec, glob_max_rel_trunc_err, glob_max_hours,
glob_large_float, centuries_in_millinium, years_in_century, days_in_year,
min_in_hour, djd_debug, glob_max_iter, glob_look_poles, glob_percent_done,
MAX_UNCHANGED, glob_initial_pass, glob_almost_1, glob_max_opt_iter,
array_const_1, array_const_0D3, array_const_0D2, array_const_0D1,
array_const_0D0, array_y, array_x, array_m1, array_last_rel_error,
array_1st_rel_error, array_pole, array_fact_1, array_type_pole,
array_y_init, array_tmp0, array_tmp1, array_tmp2, array_tmp3, array_tmp4,
array_tmp5, array_tmp6, array_norms, array_poles, array_y_higher,
array_y_higher_work2, array_complex_pole, array_fact_2, array_y_set_initial,
array_y_higher_work, array_real_pole, glob_last;
if 0 <= iter then
ind_var := array_x[1];
omniout_float(ALWAYS, "x[1] ", 33,
ind_var, 20, " ");
analytic_val_y := exact_soln_y(ind_var);
omniout_float(ALWAYS, "y[1] (analytic) ", 33,
analytic_val_y, 20, " ");
term_no := 1;
numeric_val := array_y[term_no];
abserr := omniabs(numeric_val - analytic_val_y);
omniout_float(ALWAYS, "y[1] (numeric) ", 33,
numeric_val, 20, " ");
if omniabs(analytic_val_y) <> 0. then
relerr := abserr*100.0/omniabs(analytic_val_y);
if relerr <> 0. then
glob_good_digits := -trunc(log10(relerr/100.0))
else glob_good_digits := Digits
end if
else relerr := -1.0; glob_good_digits := -1
end if;
if glob_iter = 1 then array_1st_rel_error[1] := relerr
else array_last_rel_error[1] := relerr
end if;
omniout_float(ALWAYS, "absolute error ", 4,
abserr, 20, " ");
omniout_float(ALWAYS, "relative error ", 4,
relerr, 20, "%");
omniout_int(INFO, "Correct digits ", 32,
glob_good_digits, 4, " ");
omniout_float(ALWAYS, "h ", 4,
glob_h, 20, " ")
end if
end proc
> # Begin Function number 4
> adjust_for_pole := proc(h_param)
> global
> DEBUGMASSIVE,
> DEBUGL,
> INFO,
> ALWAYS,
> glob_iolevel,
> glob_max_terms,
> #Top Generate Globals Decl
> glob_log10abserr,
> glob_orig_start_sec,
> glob_optimal_start,
> glob_max_trunc_err,
> glob_log10_abserr,
> hours_in_day,
> glob_start,
> glob_relerr,
> glob_hmin,
> glob_optimal_done,
> glob_subiter_method,
> glob_normmax,
> glob_iter,
> glob_current_iter,
> glob_no_eqs,
> glob_abserr,
> glob_good_digits,
> glob_curr_iter_when_opt,
> glob_smallish_float,
> glob_last_good_h,
> glob_h,
> glob_disp_incr,
> glob_reached_optimal_h,
> glob_dump,
> glob_html_log,
> glob_optimal_expect_sec,
> glob_warned,
> glob_unchanged_h_cnt,
> glob_hmin_init,
> glob_clock_sec,
> djd_debug2,
> glob_max_sec,
> glob_log10_relerr,
> glob_not_yet_finished,
> sec_in_minute,
> glob_log10normmin,
> glob_log10relerr,
> glob_dump_analytic,
> glob_hmax,
> glob_not_yet_start_msg,
> glob_small_float,
> glob_clock_start_sec,
> glob_display_flag,
> glob_max_minutes,
> glob_warned2,
> glob_optimal_clock_start_sec,
> glob_max_rel_trunc_err,
> glob_max_hours,
> glob_large_float,
> centuries_in_millinium,
> years_in_century,
> days_in_year,
> min_in_hour,
> djd_debug,
> glob_max_iter,
> glob_look_poles,
> glob_percent_done,
> MAX_UNCHANGED,
> glob_initial_pass,
> glob_almost_1,
> glob_max_opt_iter,
> #Bottom Generate Globals Decl
> #BEGIN CONST
> array_const_1,
> array_const_0D3,
> array_const_0D2,
> array_const_0D1,
> array_const_0D0,
> #END CONST
> array_y,
> array_x,
> array_m1,
> array_last_rel_error,
> array_1st_rel_error,
> array_pole,
> array_fact_1,
> array_type_pole,
> array_y_init,
> array_tmp0,
> array_tmp1,
> array_tmp2,
> array_tmp3,
> array_tmp4,
> array_tmp5,
> array_tmp6,
> array_norms,
> array_poles,
> array_y_higher,
> array_y_higher_work2,
> array_complex_pole,
> array_fact_2,
> array_y_set_initial,
> array_y_higher_work,
> array_real_pole,
> glob_last;
>
> local hnew, sz2, tmp;
>
>
>
> #TOP ADJUST FOR POLE
>
> hnew := h_param;
> glob_normmax := glob_small_float;
> if (omniabs(array_y_higher[1,1]) > glob_small_float) then # if number 1
> tmp := omniabs(array_y_higher[1,1]);
> if (tmp < glob_normmax) then # if number 2
> glob_normmax := tmp;
> fi;# end if 2
> fi;# end if 1
> ;
> if (glob_look_poles and (omniabs(array_pole[1]) > glob_small_float) and (array_pole[1] <> glob_large_float)) then # if number 1
> sz2 := array_pole[1]/10.0;
> if (sz2 < hnew) then # if number 2
> omniout_float(INFO,"glob_h adjusted to ",20,h_param,12,"due to singularity.");
> omniout_str(INFO,"Reached Optimal");
> return(hnew);
> fi;# end if 2
> fi;# end if 1
> ;
> if ( not glob_reached_optimal_h) then # if number 1
> glob_reached_optimal_h := true;
> glob_curr_iter_when_opt := glob_current_iter;
> glob_optimal_clock_start_sec := elapsed_time_seconds();
> glob_optimal_start := array_x[1];
> fi;# end if 1
> ;
> hnew := sz2;
> ;#END block
> return(hnew);
> #BOTTOM ADJUST FOR POLE
>
> # End Function number 4
> end;
adjust_for_pole := proc(h_param)
local hnew, sz2, tmp;
global DEBUGMASSIVE, DEBUGL, INFO, ALWAYS, glob_iolevel, glob_max_terms,
glob_log10abserr, glob_orig_start_sec, glob_optimal_start,
glob_max_trunc_err, glob_log10_abserr, hours_in_day, glob_start,
glob_relerr, glob_hmin, glob_optimal_done, glob_subiter_method,
glob_normmax, glob_iter, glob_current_iter, glob_no_eqs, glob_abserr,
glob_good_digits, glob_curr_iter_when_opt, glob_smallish_float,
glob_last_good_h, glob_h, glob_disp_incr, glob_reached_optimal_h, glob_dump,
glob_html_log, glob_optimal_expect_sec, glob_warned, glob_unchanged_h_cnt,
glob_hmin_init, glob_clock_sec, djd_debug2, glob_max_sec, glob_log10_relerr,
glob_not_yet_finished, sec_in_minute, glob_log10normmin, glob_log10relerr,
glob_dump_analytic, glob_hmax, glob_not_yet_start_msg, glob_small_float,
glob_clock_start_sec, glob_display_flag, glob_max_minutes, glob_warned2,
glob_optimal_clock_start_sec, glob_max_rel_trunc_err, glob_max_hours,
glob_large_float, centuries_in_millinium, years_in_century, days_in_year,
min_in_hour, djd_debug, glob_max_iter, glob_look_poles, glob_percent_done,
MAX_UNCHANGED, glob_initial_pass, glob_almost_1, glob_max_opt_iter,
array_const_1, array_const_0D3, array_const_0D2, array_const_0D1,
array_const_0D0, array_y, array_x, array_m1, array_last_rel_error,
array_1st_rel_error, array_pole, array_fact_1, array_type_pole,
array_y_init, array_tmp0, array_tmp1, array_tmp2, array_tmp3, array_tmp4,
array_tmp5, array_tmp6, array_norms, array_poles, array_y_higher,
array_y_higher_work2, array_complex_pole, array_fact_2, array_y_set_initial,
array_y_higher_work, array_real_pole, glob_last;
hnew := h_param;
glob_normmax := glob_small_float;
if glob_small_float < omniabs(array_y_higher[1, 1]) then
tmp := omniabs(array_y_higher[1, 1]);
if tmp < glob_normmax then glob_normmax := tmp end if
end if;
if glob_look_poles and glob_small_float < omniabs(array_pole[1]) and
array_pole[1] <> glob_large_float then
sz2 := array_pole[1]/10.0;
if sz2 < hnew then
omniout_float(INFO, "glob_h adjusted to ", 20, h_param, 12,
"due to singularity.");
omniout_str(INFO, "Reached Optimal");
return hnew
end if
end if;
if not glob_reached_optimal_h then
glob_reached_optimal_h := true;
glob_curr_iter_when_opt := glob_current_iter;
glob_optimal_clock_start_sec := elapsed_time_seconds();
glob_optimal_start := array_x[1]
end if;
hnew := sz2;
return hnew
end proc
> # Begin Function number 5
> prog_report := proc(x_start,x_end)
> global
> DEBUGMASSIVE,
> DEBUGL,
> INFO,
> ALWAYS,
> glob_iolevel,
> glob_max_terms,
> #Top Generate Globals Decl
> glob_log10abserr,
> glob_orig_start_sec,
> glob_optimal_start,
> glob_max_trunc_err,
> glob_log10_abserr,
> hours_in_day,
> glob_start,
> glob_relerr,
> glob_hmin,
> glob_optimal_done,
> glob_subiter_method,
> glob_normmax,
> glob_iter,
> glob_current_iter,
> glob_no_eqs,
> glob_abserr,
> glob_good_digits,
> glob_curr_iter_when_opt,
> glob_smallish_float,
> glob_last_good_h,
> glob_h,
> glob_disp_incr,
> glob_reached_optimal_h,
> glob_dump,
> glob_html_log,
> glob_optimal_expect_sec,
> glob_warned,
> glob_unchanged_h_cnt,
> glob_hmin_init,
> glob_clock_sec,
> djd_debug2,
> glob_max_sec,
> glob_log10_relerr,
> glob_not_yet_finished,
> sec_in_minute,
> glob_log10normmin,
> glob_log10relerr,
> glob_dump_analytic,
> glob_hmax,
> glob_not_yet_start_msg,
> glob_small_float,
> glob_clock_start_sec,
> glob_display_flag,
> glob_max_minutes,
> glob_warned2,
> glob_optimal_clock_start_sec,
> glob_max_rel_trunc_err,
> glob_max_hours,
> glob_large_float,
> centuries_in_millinium,
> years_in_century,
> days_in_year,
> min_in_hour,
> djd_debug,
> glob_max_iter,
> glob_look_poles,
> glob_percent_done,
> MAX_UNCHANGED,
> glob_initial_pass,
> glob_almost_1,
> glob_max_opt_iter,
> #Bottom Generate Globals Decl
> #BEGIN CONST
> array_const_1,
> array_const_0D3,
> array_const_0D2,
> array_const_0D1,
> array_const_0D0,
> #END CONST
> array_y,
> array_x,
> array_m1,
> array_last_rel_error,
> array_1st_rel_error,
> array_pole,
> array_fact_1,
> array_type_pole,
> array_y_init,
> array_tmp0,
> array_tmp1,
> array_tmp2,
> array_tmp3,
> array_tmp4,
> array_tmp5,
> array_tmp6,
> array_norms,
> array_poles,
> array_y_higher,
> array_y_higher_work2,
> array_complex_pole,
> array_fact_2,
> array_y_set_initial,
> array_y_higher_work,
> array_real_pole,
> glob_last;
>
> local clock_sec, opt_clock_sec, clock_sec1, expect_sec, left_sec, percent_done, total_clock_sec;
>
>
>
>
>
> #TOP PROGRESS REPORT
> clock_sec1 := elapsed_time_seconds();
> total_clock_sec := convfloat(clock_sec1) - convfloat(glob_orig_start_sec);
> glob_clock_sec := convfloat(clock_sec1) - convfloat(glob_clock_start_sec);
> left_sec := convfloat(glob_max_sec) + convfloat(glob_orig_start_sec) - convfloat(clock_sec1);
> expect_sec := comp_expect_sec(convfloat(x_end),convfloat(x_start),convfloat(array_x[1]) + convfloat(glob_h) ,convfloat( clock_sec1) - convfloat(glob_orig_start_sec));
> opt_clock_sec := convfloat( clock_sec1) - convfloat(glob_optimal_clock_start_sec);
> glob_optimal_expect_sec := comp_expect_sec(convfloat(x_end),convfloat(x_start),convfloat(array_x[1]) +convfloat( glob_h) ,convfloat( opt_clock_sec));
> percent_done := comp_percent(convfloat(x_end),convfloat(x_start),convfloat(array_x[1]) + convfloat(glob_h));
> glob_percent_done := percent_done;
> omniout_str_noeol(INFO,"Total Elapsed Time ");
> omniout_timestr(convfloat(total_clock_sec));
> omniout_str_noeol(INFO,"Elapsed Time(since restart) ");
> omniout_timestr(convfloat(glob_clock_sec));
> if (convfloat(percent_done) < convfloat(100.0)) then # if number 1
> omniout_str_noeol(INFO,"Expected Time Remaining ");
> omniout_timestr(convfloat(expect_sec));
> omniout_str_noeol(INFO,"Optimized Time Remaining ");
> omniout_timestr(convfloat(glob_optimal_expect_sec));
> fi;# end if 1
> ;
> omniout_str_noeol(INFO,"Time to Timeout ");
> omniout_timestr(convfloat(left_sec));
> omniout_float(INFO, "Percent Done ",33,percent_done,4,"%");
> #BOTTOM PROGRESS REPORT
>
> # End Function number 5
> end;
prog_report := proc(x_start, x_end)
local clock_sec, opt_clock_sec, clock_sec1, expect_sec, left_sec,
percent_done, total_clock_sec;
global DEBUGMASSIVE, DEBUGL, INFO, ALWAYS, glob_iolevel, glob_max_terms,
glob_log10abserr, glob_orig_start_sec, glob_optimal_start,
glob_max_trunc_err, glob_log10_abserr, hours_in_day, glob_start,
glob_relerr, glob_hmin, glob_optimal_done, glob_subiter_method,
glob_normmax, glob_iter, glob_current_iter, glob_no_eqs, glob_abserr,
glob_good_digits, glob_curr_iter_when_opt, glob_smallish_float,
glob_last_good_h, glob_h, glob_disp_incr, glob_reached_optimal_h, glob_dump,
glob_html_log, glob_optimal_expect_sec, glob_warned, glob_unchanged_h_cnt,
glob_hmin_init, glob_clock_sec, djd_debug2, glob_max_sec, glob_log10_relerr,
glob_not_yet_finished, sec_in_minute, glob_log10normmin, glob_log10relerr,
glob_dump_analytic, glob_hmax, glob_not_yet_start_msg, glob_small_float,
glob_clock_start_sec, glob_display_flag, glob_max_minutes, glob_warned2,
glob_optimal_clock_start_sec, glob_max_rel_trunc_err, glob_max_hours,
glob_large_float, centuries_in_millinium, years_in_century, days_in_year,
min_in_hour, djd_debug, glob_max_iter, glob_look_poles, glob_percent_done,
MAX_UNCHANGED, glob_initial_pass, glob_almost_1, glob_max_opt_iter,
array_const_1, array_const_0D3, array_const_0D2, array_const_0D1,
array_const_0D0, array_y, array_x, array_m1, array_last_rel_error,
array_1st_rel_error, array_pole, array_fact_1, array_type_pole,
array_y_init, array_tmp0, array_tmp1, array_tmp2, array_tmp3, array_tmp4,
array_tmp5, array_tmp6, array_norms, array_poles, array_y_higher,
array_y_higher_work2, array_complex_pole, array_fact_2, array_y_set_initial,
array_y_higher_work, array_real_pole, glob_last;
clock_sec1 := elapsed_time_seconds();
total_clock_sec :=
convfloat(clock_sec1) - convfloat(glob_orig_start_sec);
glob_clock_sec :=
convfloat(clock_sec1) - convfloat(glob_clock_start_sec);
left_sec := convfloat(glob_max_sec) + convfloat(glob_orig_start_sec)
- convfloat(clock_sec1);
expect_sec := comp_expect_sec(convfloat(x_end), convfloat(x_start),
convfloat(array_x[1]) + convfloat(glob_h),
convfloat(clock_sec1) - convfloat(glob_orig_start_sec));
opt_clock_sec :=
convfloat(clock_sec1) - convfloat(glob_optimal_clock_start_sec);
glob_optimal_expect_sec := comp_expect_sec(convfloat(x_end),
convfloat(x_start), convfloat(array_x[1]) + convfloat(glob_h),
convfloat(opt_clock_sec));
percent_done := comp_percent(convfloat(x_end), convfloat(x_start),
convfloat(array_x[1]) + convfloat(glob_h));
glob_percent_done := percent_done;
omniout_str_noeol(INFO, "Total Elapsed Time ");
omniout_timestr(convfloat(total_clock_sec));
omniout_str_noeol(INFO, "Elapsed Time(since restart) ");
omniout_timestr(convfloat(glob_clock_sec));
if convfloat(percent_done) < convfloat(100.0) then
omniout_str_noeol(INFO, "Expected Time Remaining ");
omniout_timestr(convfloat(expect_sec));
omniout_str_noeol(INFO, "Optimized Time Remaining ");
omniout_timestr(convfloat(glob_optimal_expect_sec))
end if;
omniout_str_noeol(INFO, "Time to Timeout ");
omniout_timestr(convfloat(left_sec));
omniout_float(INFO, "Percent Done ", 33,
percent_done, 4, "%")
end proc
> # Begin Function number 6
> check_for_pole := proc()
> global
> DEBUGMASSIVE,
> DEBUGL,
> INFO,
> ALWAYS,
> glob_iolevel,
> glob_max_terms,
> #Top Generate Globals Decl
> glob_log10abserr,
> glob_orig_start_sec,
> glob_optimal_start,
> glob_max_trunc_err,
> glob_log10_abserr,
> hours_in_day,
> glob_start,
> glob_relerr,
> glob_hmin,
> glob_optimal_done,
> glob_subiter_method,
> glob_normmax,
> glob_iter,
> glob_current_iter,
> glob_no_eqs,
> glob_abserr,
> glob_good_digits,
> glob_curr_iter_when_opt,
> glob_smallish_float,
> glob_last_good_h,
> glob_h,
> glob_disp_incr,
> glob_reached_optimal_h,
> glob_dump,
> glob_html_log,
> glob_optimal_expect_sec,
> glob_warned,
> glob_unchanged_h_cnt,
> glob_hmin_init,
> glob_clock_sec,
> djd_debug2,
> glob_max_sec,
> glob_log10_relerr,
> glob_not_yet_finished,
> sec_in_minute,
> glob_log10normmin,
> glob_log10relerr,
> glob_dump_analytic,
> glob_hmax,
> glob_not_yet_start_msg,
> glob_small_float,
> glob_clock_start_sec,
> glob_display_flag,
> glob_max_minutes,
> glob_warned2,
> glob_optimal_clock_start_sec,
> glob_max_rel_trunc_err,
> glob_max_hours,
> glob_large_float,
> centuries_in_millinium,
> years_in_century,
> days_in_year,
> min_in_hour,
> djd_debug,
> glob_max_iter,
> glob_look_poles,
> glob_percent_done,
> MAX_UNCHANGED,
> glob_initial_pass,
> glob_almost_1,
> glob_max_opt_iter,
> #Bottom Generate Globals Decl
> #BEGIN CONST
> array_const_1,
> array_const_0D3,
> array_const_0D2,
> array_const_0D1,
> array_const_0D0,
> #END CONST
> array_y,
> array_x,
> array_m1,
> array_last_rel_error,
> array_1st_rel_error,
> array_pole,
> array_fact_1,
> array_type_pole,
> array_y_init,
> array_tmp0,
> array_tmp1,
> array_tmp2,
> array_tmp3,
> array_tmp4,
> array_tmp5,
> array_tmp6,
> array_norms,
> array_poles,
> array_y_higher,
> array_y_higher_work2,
> array_complex_pole,
> array_fact_2,
> array_y_set_initial,
> array_y_higher_work,
> array_real_pole,
> glob_last;
>
> local cnt, dr1, dr2, ds1, ds2, hdrc, m, n, nr1, nr2, ord_no, rad_c, rcs, rm0, rm1, rm2, rm3, rm4, found;
>
>
>
>
>
> #TOP CHECK FOR POLE
> #IN RADII REAL EQ = 1
> #Computes radius of convergence and r_order of pole from 3 adjacent Taylor series terms. EQUATUON NUMBER 1
> #Applies to pole of arbitrary r_order on the real axis,
> #Due to Prof. George Corliss.
> n := glob_max_terms;
> m := n - 1 - 1;
> while ((m >= 10) and ((omniabs(array_y_higher[1,m]) < glob_small_float) or (omniabs(array_y_higher[1,m-1]) < glob_small_float) or (omniabs(array_y_higher[1,m-2]) < glob_small_float ))) do # do number 2
> m := m - 1;
> od;# end do number 2
> ;
> if (m > 10) then # if number 1
> rm0 := array_y_higher[1,m]/array_y_higher[1,m-1];
> rm1 := array_y_higher[1,m-1]/array_y_higher[1,m-2];
> hdrc := convfloat(m-1)*rm0-convfloat(m-2)*rm1;
> if (omniabs(hdrc) > glob_small_float) then # if number 2
> rcs := glob_h/hdrc;
> ord_no := convfloat(m-1)*rm0/hdrc - convfloat(m) + 2.0;
> array_real_pole[1,1] := rcs;
> array_real_pole[1,2] := ord_no;
> else
> array_real_pole[1,1] := glob_large_float;
> array_real_pole[1,2] := glob_large_float;
> fi;# end if 2
> else
> array_real_pole[1,1] := glob_large_float;
> array_real_pole[1,2] := glob_large_float;
> fi;# end if 1
> ;
> #BOTTOM RADII REAL EQ = 1
> #TOP RADII COMPLEX EQ = 1
> #Computes radius of convergence for complex conjugate pair of poles.
> #from 6 adjacent Taylor series terms
> #Also computes r_order of poles.
> #Due to Manuel Prieto.
> #With a correction by Dennis J. Darland
> n := glob_max_terms - 1 - 1;
> cnt := 0;
> while ((cnt < 5) and (n >= 10)) do # do number 2
> if (omniabs(array_y_higher[1,n]) > glob_small_float) then # if number 1
> cnt := cnt + 1;
> else
> cnt := 0;
> fi;# end if 1
> ;
> n := n - 1;
> od;# end do number 2
> ;
> m := n + cnt;
> if (m <= 10) then # if number 1
> array_complex_pole[1,1] := glob_large_float;
> array_complex_pole[1,2] := glob_large_float;
> elif ((omniabs(array_y_higher[1,m]) >= (glob_large_float)) or (omniabs(array_y_higher[1,m-1]) >=(glob_large_float)) or (omniabs(array_y_higher[1,m-2]) >= (glob_large_float)) or (omniabs(array_y_higher[1,m-3]) >= (glob_large_float)) or (omniabs(array_y_higher[1,m-4]) >= (glob_large_float)) or (omniabs(array_y_higher[1,m-5]) >= (glob_large_float))) then # if number 2
> array_complex_pole[1,1] := glob_large_float;
> array_complex_pole[1,2] := glob_large_float;
> else
> rm0 := (array_y_higher[1,m])/(array_y_higher[1,m-1]);
> rm1 := (array_y_higher[1,m-1])/(array_y_higher[1,m-2]);
> rm2 := (array_y_higher[1,m-2])/(array_y_higher[1,m-3]);
> rm3 := (array_y_higher[1,m-3])/(array_y_higher[1,m-4]);
> rm4 := (array_y_higher[1,m-4])/(array_y_higher[1,m-5]);
> nr1 := convfloat(m-1)*rm0 - 2.0*convfloat(m-2)*rm1 + convfloat(m-3)*rm2;
> nr2 := convfloat(m-2)*rm1 - 2.0*convfloat(m-3)*rm2 + convfloat(m-4)*rm3;
> dr1 := (-1.0)/rm1 + 2.0/rm2 - 1.0/rm3;
> dr2 := (-1.0)/rm2 + 2.0/rm3 - 1.0/rm4;
> ds1 := 3.0/rm1 - 8.0/rm2 + 5.0/rm3;
> ds2 := 3.0/rm2 - 8.0/rm3 + 5.0/rm4;
> if ((omniabs(nr1 * dr2 - nr2 * dr1) <= glob_small_float) or (omniabs(dr1) <= glob_small_float)) then # if number 3
> array_complex_pole[1,1] := glob_large_float;
> array_complex_pole[1,2] := glob_large_float;
> else
> if (omniabs(nr1*dr2 - nr2 * dr1) > glob_small_float) then # if number 4
> rcs := ((ds1*dr2 - ds2*dr1 +dr1*dr2)/(nr1*dr2 - nr2 * dr1));
> #(Manuels) rcs := (ds1*dr2 - ds2*dr1)/(nr1*dr2 - nr2 * dr1)
> ord_no := (rcs*nr1 - ds1)/(2.0*dr1) -convfloat(m)/2.0;
> if (omniabs(rcs) > glob_small_float) then # if number 5
> if (rcs > 0.0) then # if number 6
> rad_c := sqrt(rcs) * glob_h;
> else
> rad_c := glob_large_float;
> fi;# end if 6
> else
> rad_c := glob_large_float;
> ord_no := glob_large_float;
> fi;# end if 5
> else
> rad_c := glob_large_float;
> ord_no := glob_large_float;
> fi;# end if 4
> fi;# end if 3
> ;
> array_complex_pole[1,1] := rad_c;
> array_complex_pole[1,2] := ord_no;
> fi;# end if 2
> ;
> #BOTTOM RADII COMPLEX EQ = 1
> found := false;
> #TOP WHICH RADII EQ = 1
> if ( not found and ((array_real_pole[1,1] = glob_large_float) or (array_real_pole[1,2] = glob_large_float)) and ((array_complex_pole[1,1] <> glob_large_float) and (array_complex_pole[1,2] <> glob_large_float)) and ((array_complex_pole[1,1] > 0.0) and (array_complex_pole[1,2] > 0.0))) then # if number 2
> array_poles[1,1] := array_complex_pole[1,1];
> array_poles[1,2] := array_complex_pole[1,2];
> found := true;
> array_type_pole[1] := 2;
> if (glob_display_flag) then # if number 3
> omniout_str(ALWAYS,"Complex estimate of poles used");
> fi;# end if 3
> ;
> fi;# end if 2
> ;
> if ( not found and ((array_real_pole[1,1] <> glob_large_float) and (array_real_pole[1,2] <> glob_large_float) and (array_real_pole[1,1] > 0.0) and (array_real_pole[1,2] > 0.0) and ((array_complex_pole[1,1] = glob_large_float) or (array_complex_pole[1,2] = glob_large_float) or (array_complex_pole[1,1] <= 0.0 ) or (array_complex_pole[1,2] <= 0.0)))) then # if number 2
> array_poles[1,1] := array_real_pole[1,1];
> array_poles[1,2] := array_real_pole[1,2];
> found := true;
> array_type_pole[1] := 1;
> if (glob_display_flag) then # if number 3
> omniout_str(ALWAYS,"Real estimate of pole used");
> fi;# end if 3
> ;
> fi;# end if 2
> ;
> if ( not found and (((array_real_pole[1,1] = glob_large_float) or (array_real_pole[1,2] = glob_large_float)) and ((array_complex_pole[1,1] = glob_large_float) or (array_complex_pole[1,2] = glob_large_float)))) then # if number 2
> array_poles[1,1] := glob_large_float;
> array_poles[1,2] := glob_large_float;
> found := true;
> array_type_pole[1] := 3;
> if (glob_display_flag) then # if number 3
> omniout_str(ALWAYS,"NO POLE");
> fi;# end if 3
> ;
> fi;# end if 2
> ;
> if ( not found and ((array_real_pole[1,1] < array_complex_pole[1,1]) and (array_real_pole[1,1] > 0.0) and (array_real_pole[1,2] > 0.0))) then # if number 2
> array_poles[1,1] := array_real_pole[1,1];
> array_poles[1,2] := array_real_pole[1,2];
> found := true;
> array_type_pole[1] := 1;
> if (glob_display_flag) then # if number 3
> omniout_str(ALWAYS,"Real estimate of pole used");
> fi;# end if 3
> ;
> fi;# end if 2
> ;
> if ( not found and ((array_complex_pole[1,1] <> glob_large_float) and (array_complex_pole[1,2] <> glob_large_float) and (array_complex_pole[1,1] > 0.0) and (array_complex_pole[1,2] > 0.0))) then # if number 2
> array_poles[1,1] := array_complex_pole[1,1];
> array_poles[1,2] := array_complex_pole[1,2];
> array_type_pole[1] := 2;
> found := true;
> if (glob_display_flag) then # if number 3
> omniout_str(ALWAYS,"Complex estimate of poles used");
> fi;# end if 3
> ;
> fi;# end if 2
> ;
> if ( not found ) then # if number 2
> array_poles[1,1] := glob_large_float;
> array_poles[1,2] := glob_large_float;
> array_type_pole[1] := 3;
> if (glob_display_flag) then # if number 3
> omniout_str(ALWAYS,"NO POLE");
> fi;# end if 3
> ;
> fi;# end if 2
> ;
> #BOTTOM WHICH RADII EQ = 1
> array_pole[1] := glob_large_float;
> array_pole[2] := glob_large_float;
> #TOP WHICH RADIUS EQ = 1
> if (array_pole[1] > array_poles[1,1]) then # if number 2
> array_pole[1] := array_poles[1,1];
> array_pole[2] := array_poles[1,2];
> fi;# end if 2
> ;
> #BOTTOM WHICH RADIUS EQ = 1
> #BOTTOM CHECK FOR POLE
> display_pole();
>
> # End Function number 6
> end;
check_for_pole := proc()
local cnt, dr1, dr2, ds1, ds2, hdrc, m, n, nr1, nr2, ord_no, rad_c, rcs,
rm0, rm1, rm2, rm3, rm4, found;
global DEBUGMASSIVE, DEBUGL, INFO, ALWAYS, glob_iolevel, glob_max_terms,
glob_log10abserr, glob_orig_start_sec, glob_optimal_start,
glob_max_trunc_err, glob_log10_abserr, hours_in_day, glob_start,
glob_relerr, glob_hmin, glob_optimal_done, glob_subiter_method,
glob_normmax, glob_iter, glob_current_iter, glob_no_eqs, glob_abserr,
glob_good_digits, glob_curr_iter_when_opt, glob_smallish_float,
glob_last_good_h, glob_h, glob_disp_incr, glob_reached_optimal_h, glob_dump,
glob_html_log, glob_optimal_expect_sec, glob_warned, glob_unchanged_h_cnt,
glob_hmin_init, glob_clock_sec, djd_debug2, glob_max_sec, glob_log10_relerr,
glob_not_yet_finished, sec_in_minute, glob_log10normmin, glob_log10relerr,
glob_dump_analytic, glob_hmax, glob_not_yet_start_msg, glob_small_float,
glob_clock_start_sec, glob_display_flag, glob_max_minutes, glob_warned2,
glob_optimal_clock_start_sec, glob_max_rel_trunc_err, glob_max_hours,
glob_large_float, centuries_in_millinium, years_in_century, days_in_year,
min_in_hour, djd_debug, glob_max_iter, glob_look_poles, glob_percent_done,
MAX_UNCHANGED, glob_initial_pass, glob_almost_1, glob_max_opt_iter,
array_const_1, array_const_0D3, array_const_0D2, array_const_0D1,
array_const_0D0, array_y, array_x, array_m1, array_last_rel_error,
array_1st_rel_error, array_pole, array_fact_1, array_type_pole,
array_y_init, array_tmp0, array_tmp1, array_tmp2, array_tmp3, array_tmp4,
array_tmp5, array_tmp6, array_norms, array_poles, array_y_higher,
array_y_higher_work2, array_complex_pole, array_fact_2, array_y_set_initial,
array_y_higher_work, array_real_pole, glob_last;
n := glob_max_terms;
m := n - 2;
while 10 <= m and (omniabs(array_y_higher[1, m]) < glob_small_float or
omniabs(array_y_higher[1, m - 1]) < glob_small_float or
omniabs(array_y_higher[1, m - 2]) < glob_small_float) do m := m - 1
end do;
if 10 < m then
rm0 := array_y_higher[1, m]/array_y_higher[1, m - 1];
rm1 := array_y_higher[1, m - 1]/array_y_higher[1, m - 2];
hdrc := convfloat(m - 1)*rm0 - convfloat(m - 2)*rm1;
if glob_small_float < omniabs(hdrc) then
rcs := glob_h/hdrc;
ord_no := convfloat(m - 1)*rm0/hdrc - convfloat(m) + 2.0;
array_real_pole[1, 1] := rcs;
array_real_pole[1, 2] := ord_no
else
array_real_pole[1, 1] := glob_large_float;
array_real_pole[1, 2] := glob_large_float
end if
else
array_real_pole[1, 1] := glob_large_float;
array_real_pole[1, 2] := glob_large_float
end if;
n := glob_max_terms - 2;
cnt := 0;
while cnt < 5 and 10 <= n do
if glob_small_float < omniabs(array_y_higher[1, n]) then
cnt := cnt + 1
else cnt := 0
end if;
n := n - 1
end do;
m := n + cnt;
if m <= 10 then
array_complex_pole[1, 1] := glob_large_float;
array_complex_pole[1, 2] := glob_large_float
elif glob_large_float <= omniabs(array_y_higher[1, m]) or
glob_large_float <= omniabs(array_y_higher[1, m - 1]) or
glob_large_float <= omniabs(array_y_higher[1, m - 2]) or
glob_large_float <= omniabs(array_y_higher[1, m - 3]) or
glob_large_float <= omniabs(array_y_higher[1, m - 4]) or
glob_large_float <= omniabs(array_y_higher[1, m - 5]) then
array_complex_pole[1, 1] := glob_large_float;
array_complex_pole[1, 2] := glob_large_float
else
rm0 := array_y_higher[1, m]/array_y_higher[1, m - 1];
rm1 := array_y_higher[1, m - 1]/array_y_higher[1, m - 2];
rm2 := array_y_higher[1, m - 2]/array_y_higher[1, m - 3];
rm3 := array_y_higher[1, m - 3]/array_y_higher[1, m - 4];
rm4 := array_y_higher[1, m - 4]/array_y_higher[1, m - 5];
nr1 := convfloat(m - 1)*rm0 - 2.0*convfloat(m - 2)*rm1
+ convfloat(m - 3)*rm2;
nr2 := convfloat(m - 2)*rm1 - 2.0*convfloat(m - 3)*rm2
+ convfloat(m - 4)*rm3;
dr1 := (-1)*(1.0)/rm1 + 2.0/rm2 - 1.0/rm3;
dr2 := (-1)*(1.0)/rm2 + 2.0/rm3 - 1.0/rm4;
ds1 := 3.0/rm1 - 8.0/rm2 + 5.0/rm3;
ds2 := 3.0/rm2 - 8.0/rm3 + 5.0/rm4;
if omniabs(nr1*dr2 - nr2*dr1) <= glob_small_float or
omniabs(dr1) <= glob_small_float then
array_complex_pole[1, 1] := glob_large_float;
array_complex_pole[1, 2] := glob_large_float
else
if glob_small_float < omniabs(nr1*dr2 - nr2*dr1) then
rcs := (ds1*dr2 - ds2*dr1 + dr1*dr2)/(nr1*dr2 - nr2*dr1);
ord_no := (rcs*nr1 - ds1)/(2.0*dr1) - convfloat(m)/2.0;
if glob_small_float < omniabs(rcs) then
if 0. < rcs then rad_c := sqrt(rcs)*glob_h
else rad_c := glob_large_float
end if
else rad_c := glob_large_float; ord_no := glob_large_float
end if
else rad_c := glob_large_float; ord_no := glob_large_float
end if
end if;
array_complex_pole[1, 1] := rad_c;
array_complex_pole[1, 2] := ord_no
end if;
found := false;
if not found and (array_real_pole[1, 1] = glob_large_float or
array_real_pole[1, 2] = glob_large_float) and
array_complex_pole[1, 1] <> glob_large_float and
array_complex_pole[1, 2] <> glob_large_float and
0. < array_complex_pole[1, 1] and 0. < array_complex_pole[1, 2] then
array_poles[1, 1] := array_complex_pole[1, 1];
array_poles[1, 2] := array_complex_pole[1, 2];
found := true;
array_type_pole[1] := 2;
if glob_display_flag then
omniout_str(ALWAYS, "Complex estimate of poles used")
end if
end if;
if not found and array_real_pole[1, 1] <> glob_large_float and
array_real_pole[1, 2] <> glob_large_float and
0. < array_real_pole[1, 1] and 0. < array_real_pole[1, 2] and (
array_complex_pole[1, 1] = glob_large_float or
array_complex_pole[1, 2] = glob_large_float or
array_complex_pole[1, 1] <= 0. or array_complex_pole[1, 2] <= 0.) then
array_poles[1, 1] := array_real_pole[1, 1];
array_poles[1, 2] := array_real_pole[1, 2];
found := true;
array_type_pole[1] := 1;
if glob_display_flag then
omniout_str(ALWAYS, "Real estimate of pole used")
end if
end if;
if not found and (array_real_pole[1, 1] = glob_large_float or
array_real_pole[1, 2] = glob_large_float) and (
array_complex_pole[1, 1] = glob_large_float or
array_complex_pole[1, 2] = glob_large_float) then
array_poles[1, 1] := glob_large_float;
array_poles[1, 2] := glob_large_float;
found := true;
array_type_pole[1] := 3;
if glob_display_flag then omniout_str(ALWAYS, "NO POLE") end if
end if;
if not found and array_real_pole[1, 1] < array_complex_pole[1, 1] and
0. < array_real_pole[1, 1] and 0. < array_real_pole[1, 2] then
array_poles[1, 1] := array_real_pole[1, 1];
array_poles[1, 2] := array_real_pole[1, 2];
found := true;
array_type_pole[1] := 1;
if glob_display_flag then
omniout_str(ALWAYS, "Real estimate of pole used")
end if
end if;
if not found and array_complex_pole[1, 1] <> glob_large_float and
array_complex_pole[1, 2] <> glob_large_float and
0. < array_complex_pole[1, 1] and 0. < array_complex_pole[1, 2] then
array_poles[1, 1] := array_complex_pole[1, 1];
array_poles[1, 2] := array_complex_pole[1, 2];
array_type_pole[1] := 2;
found := true;
if glob_display_flag then
omniout_str(ALWAYS, "Complex estimate of poles used")
end if
end if;
if not found then
array_poles[1, 1] := glob_large_float;
array_poles[1, 2] := glob_large_float;
array_type_pole[1] := 3;
if glob_display_flag then omniout_str(ALWAYS, "NO POLE") end if
end if;
array_pole[1] := glob_large_float;
array_pole[2] := glob_large_float;
if array_poles[1, 1] < array_pole[1] then
array_pole[1] := array_poles[1, 1];
array_pole[2] := array_poles[1, 2]
end if;
display_pole()
end proc
> # Begin Function number 7
> get_norms := proc()
> global
> DEBUGMASSIVE,
> DEBUGL,
> INFO,
> ALWAYS,
> glob_iolevel,
> glob_max_terms,
> #Top Generate Globals Decl
> glob_log10abserr,
> glob_orig_start_sec,
> glob_optimal_start,
> glob_max_trunc_err,
> glob_log10_abserr,
> hours_in_day,
> glob_start,
> glob_relerr,
> glob_hmin,
> glob_optimal_done,
> glob_subiter_method,
> glob_normmax,
> glob_iter,
> glob_current_iter,
> glob_no_eqs,
> glob_abserr,
> glob_good_digits,
> glob_curr_iter_when_opt,
> glob_smallish_float,
> glob_last_good_h,
> glob_h,
> glob_disp_incr,
> glob_reached_optimal_h,
> glob_dump,
> glob_html_log,
> glob_optimal_expect_sec,
> glob_warned,
> glob_unchanged_h_cnt,
> glob_hmin_init,
> glob_clock_sec,
> djd_debug2,
> glob_max_sec,
> glob_log10_relerr,
> glob_not_yet_finished,
> sec_in_minute,
> glob_log10normmin,
> glob_log10relerr,
> glob_dump_analytic,
> glob_hmax,
> glob_not_yet_start_msg,
> glob_small_float,
> glob_clock_start_sec,
> glob_display_flag,
> glob_max_minutes,
> glob_warned2,
> glob_optimal_clock_start_sec,
> glob_max_rel_trunc_err,
> glob_max_hours,
> glob_large_float,
> centuries_in_millinium,
> years_in_century,
> days_in_year,
> min_in_hour,
> djd_debug,
> glob_max_iter,
> glob_look_poles,
> glob_percent_done,
> MAX_UNCHANGED,
> glob_initial_pass,
> glob_almost_1,
> glob_max_opt_iter,
> #Bottom Generate Globals Decl
> #BEGIN CONST
> array_const_1,
> array_const_0D3,
> array_const_0D2,
> array_const_0D1,
> array_const_0D0,
> #END CONST
> array_y,
> array_x,
> array_m1,
> array_last_rel_error,
> array_1st_rel_error,
> array_pole,
> array_fact_1,
> array_type_pole,
> array_y_init,
> array_tmp0,
> array_tmp1,
> array_tmp2,
> array_tmp3,
> array_tmp4,
> array_tmp5,
> array_tmp6,
> array_norms,
> array_poles,
> array_y_higher,
> array_y_higher_work2,
> array_complex_pole,
> array_fact_2,
> array_y_set_initial,
> array_y_higher_work,
> array_real_pole,
> glob_last;
>
> local iii;
>
>
>
> if ( not glob_initial_pass) then # if number 2
> iii := 1;
> while (iii <= glob_max_terms) do # do number 2
> array_norms[iii] := 0.0;
> iii := iii + 1;
> od;# end do number 2
> ;
> #TOP GET NORMS
> iii := 1;
> while (iii <= glob_max_terms) do # do number 2
> if (omniabs(array_y[iii]) > array_norms[iii]) then # if number 3
> array_norms[iii] := omniabs(array_y[iii]);
> fi;# end if 3
> ;
> iii := iii + 1;
> od;# end do number 2
> #BOTTOM GET NORMS
> ;
> fi;# end if 2
> ;
>
> # End Function number 7
> end;
get_norms := proc()
local iii;
global DEBUGMASSIVE, DEBUGL, INFO, ALWAYS, glob_iolevel, glob_max_terms,
glob_log10abserr, glob_orig_start_sec, glob_optimal_start,
glob_max_trunc_err, glob_log10_abserr, hours_in_day, glob_start,
glob_relerr, glob_hmin, glob_optimal_done, glob_subiter_method,
glob_normmax, glob_iter, glob_current_iter, glob_no_eqs, glob_abserr,
glob_good_digits, glob_curr_iter_when_opt, glob_smallish_float,
glob_last_good_h, glob_h, glob_disp_incr, glob_reached_optimal_h, glob_dump,
glob_html_log, glob_optimal_expect_sec, glob_warned, glob_unchanged_h_cnt,
glob_hmin_init, glob_clock_sec, djd_debug2, glob_max_sec, glob_log10_relerr,
glob_not_yet_finished, sec_in_minute, glob_log10normmin, glob_log10relerr,
glob_dump_analytic, glob_hmax, glob_not_yet_start_msg, glob_small_float,
glob_clock_start_sec, glob_display_flag, glob_max_minutes, glob_warned2,
glob_optimal_clock_start_sec, glob_max_rel_trunc_err, glob_max_hours,
glob_large_float, centuries_in_millinium, years_in_century, days_in_year,
min_in_hour, djd_debug, glob_max_iter, glob_look_poles, glob_percent_done,
MAX_UNCHANGED, glob_initial_pass, glob_almost_1, glob_max_opt_iter,
array_const_1, array_const_0D3, array_const_0D2, array_const_0D1,
array_const_0D0, array_y, array_x, array_m1, array_last_rel_error,
array_1st_rel_error, array_pole, array_fact_1, array_type_pole,
array_y_init, array_tmp0, array_tmp1, array_tmp2, array_tmp3, array_tmp4,
array_tmp5, array_tmp6, array_norms, array_poles, array_y_higher,
array_y_higher_work2, array_complex_pole, array_fact_2, array_y_set_initial,
array_y_higher_work, array_real_pole, glob_last;
if not glob_initial_pass then
iii := 1;
while iii <= glob_max_terms do
array_norms[iii] := 0.; iii := iii + 1
end do;
iii := 1;
while iii <= glob_max_terms do
if array_norms[iii] < omniabs(array_y[iii]) then
array_norms[iii] := omniabs(array_y[iii])
end if;
iii := iii + 1
end do
end if
end proc
> # Begin Function number 8
> atomall := proc()
> global
> DEBUGMASSIVE,
> DEBUGL,
> INFO,
> ALWAYS,
> glob_iolevel,
> glob_max_terms,
> #Top Generate Globals Decl
> glob_log10abserr,
> glob_orig_start_sec,
> glob_optimal_start,
> glob_max_trunc_err,
> glob_log10_abserr,
> hours_in_day,
> glob_start,
> glob_relerr,
> glob_hmin,
> glob_optimal_done,
> glob_subiter_method,
> glob_normmax,
> glob_iter,
> glob_current_iter,
> glob_no_eqs,
> glob_abserr,
> glob_good_digits,
> glob_curr_iter_when_opt,
> glob_smallish_float,
> glob_last_good_h,
> glob_h,
> glob_disp_incr,
> glob_reached_optimal_h,
> glob_dump,
> glob_html_log,
> glob_optimal_expect_sec,
> glob_warned,
> glob_unchanged_h_cnt,
> glob_hmin_init,
> glob_clock_sec,
> djd_debug2,
> glob_max_sec,
> glob_log10_relerr,
> glob_not_yet_finished,
> sec_in_minute,
> glob_log10normmin,
> glob_log10relerr,
> glob_dump_analytic,
> glob_hmax,
> glob_not_yet_start_msg,
> glob_small_float,
> glob_clock_start_sec,
> glob_display_flag,
> glob_max_minutes,
> glob_warned2,
> glob_optimal_clock_start_sec,
> glob_max_rel_trunc_err,
> glob_max_hours,
> glob_large_float,
> centuries_in_millinium,
> years_in_century,
> days_in_year,
> min_in_hour,
> djd_debug,
> glob_max_iter,
> glob_look_poles,
> glob_percent_done,
> MAX_UNCHANGED,
> glob_initial_pass,
> glob_almost_1,
> glob_max_opt_iter,
> #Bottom Generate Globals Decl
> #BEGIN CONST
> array_const_1,
> array_const_0D3,
> array_const_0D2,
> array_const_0D1,
> array_const_0D0,
> #END CONST
> array_y,
> array_x,
> array_m1,
> array_last_rel_error,
> array_1st_rel_error,
> array_pole,
> array_fact_1,
> array_type_pole,
> array_y_init,
> array_tmp0,
> array_tmp1,
> array_tmp2,
> array_tmp3,
> array_tmp4,
> array_tmp5,
> array_tmp6,
> array_norms,
> array_poles,
> array_y_higher,
> array_y_higher_work2,
> array_complex_pole,
> array_fact_2,
> array_y_set_initial,
> array_y_higher_work,
> array_real_pole,
> glob_last;
>
> local kkk, order_d, adj2, temporary, term;
>
>
>
>
>
> #TOP ATOMALL
> #END OUTFILE1
> #BEGIN ATOMHDR1
> #emit pre mult CONST - LINEAR $eq_no = 1 i = 1
> array_tmp1[1] := array_const_0D1[1] * array_x[1];
> #emit pre add LINEAR - CONST $eq_no = 1 i = 1
> array_tmp2[1] := array_tmp1[1] + array_const_0D2[1];
> #emit pre mult CONST - LINEAR $eq_no = 1 i = 1
> array_tmp3[1] := array_const_0D2[1] * array_x[1];
> #emit pre add LINEAR - CONST $eq_no = 1 i = 1
> array_tmp4[1] := array_tmp3[1] + array_const_0D3[1];
> #emit pre div LINEAR - LINEAR $eq_no = 1 i = 1
> array_tmp5[1] := array_tmp2[1] / array_tmp4[1];
> #emit pre add CONST FULL $eq_no = 1 i = 1
> array_tmp6[1] := array_const_0D0[1] + array_tmp5[1];
> #emit pre assign xxx $eq_no = 1 i = 1 $min_hdrs = 5
> if ( not array_y_set_initial[1,2]) then # if number 1
> if (1 <= glob_max_terms) then # if number 2
> temporary := array_tmp6[1] * expt(glob_h , (1)) * factorial_3(0,1);
> array_y[2] := temporary;
> array_y_higher[1,2] := temporary;
> temporary := temporary / glob_h * (2.0);
> array_y_higher[2,1] := temporary
> ;
> fi;# end if 2
> ;
> fi;# end if 1
> ;
> kkk := 2;
> #END ATOMHDR1
> #BEGIN ATOMHDR2
> #emit pre mult CONST - LINEAR $eq_no = 1 i = 2
> array_tmp1[2] := array_const_0D1[1] * array_x[2];
> #emit pre add LINEAR - CONST $eq_no = 1 i = 2
> array_tmp2[2] := array_tmp1[2];
> #emit pre mult CONST - LINEAR $eq_no = 1 i = 2
> array_tmp3[2] := array_const_0D2[1] * array_x[2];
> #emit pre add LINEAR - CONST $eq_no = 1 i = 2
> array_tmp4[2] := array_tmp3[2];
> #emit pre div LINEAR - LINEAR $eq_no = 1 i = 2
> array_tmp5[2] := (array_tmp2[2] - array_tmp5[1] * array_tmp4[2]) / array_tmp4[1];
> #emit pre add CONST FULL $eq_no = 1 i = 2
> array_tmp6[2] := array_tmp5[2];
> #emit pre assign xxx $eq_no = 1 i = 2 $min_hdrs = 5
> if ( not array_y_set_initial[1,3]) then # if number 1
> if (2 <= glob_max_terms) then # if number 2
> temporary := array_tmp6[2] * expt(glob_h , (1)) * factorial_3(1,2);
> array_y[3] := temporary;
> array_y_higher[1,3] := temporary;
> temporary := temporary / glob_h * (2.0);
> array_y_higher[2,2] := temporary
> ;
> fi;# end if 2
> ;
> fi;# end if 1
> ;
> kkk := 3;
> #END ATOMHDR2
> #BEGIN ATOMHDR3
> #emit pre div LINEAR - LINEAR $eq_no = 1 i = 3
> array_tmp5[3] := - array_tmp5[2] * array_tmp4[2] / array_tmp4[1];
> #emit pre add CONST FULL $eq_no = 1 i = 3
> array_tmp6[3] := array_tmp5[3];
> #emit pre assign xxx $eq_no = 1 i = 3 $min_hdrs = 5
> if ( not array_y_set_initial[1,4]) then # if number 1
> if (3 <= glob_max_terms) then # if number 2
> temporary := array_tmp6[3] * expt(glob_h , (1)) * factorial_3(2,3);
> array_y[4] := temporary;
> array_y_higher[1,4] := temporary;
> temporary := temporary / glob_h * (2.0);
> array_y_higher[2,3] := temporary
> ;
> fi;# end if 2
> ;
> fi;# end if 1
> ;
> kkk := 4;
> #END ATOMHDR3
> #BEGIN ATOMHDR4
> #emit pre div LINEAR - LINEAR $eq_no = 1 i = 4
> array_tmp5[4] := - array_tmp5[3] * array_tmp4[2] / array_tmp4[1];
> #emit pre add CONST FULL $eq_no = 1 i = 4
> array_tmp6[4] := array_tmp5[4];
> #emit pre assign xxx $eq_no = 1 i = 4 $min_hdrs = 5
> if ( not array_y_set_initial[1,5]) then # if number 1
> if (4 <= glob_max_terms) then # if number 2
> temporary := array_tmp6[4] * expt(glob_h , (1)) * factorial_3(3,4);
> array_y[5] := temporary;
> array_y_higher[1,5] := temporary;
> temporary := temporary / glob_h * (2.0);
> array_y_higher[2,4] := temporary
> ;
> fi;# end if 2
> ;
> fi;# end if 1
> ;
> kkk := 5;
> #END ATOMHDR4
> #BEGIN ATOMHDR5
> #emit pre div LINEAR - LINEAR $eq_no = 1 i = 5
> array_tmp5[5] := - array_tmp5[4] * array_tmp4[2] / array_tmp4[1];
> #emit pre add CONST FULL $eq_no = 1 i = 5
> array_tmp6[5] := array_tmp5[5];
> #emit pre assign xxx $eq_no = 1 i = 5 $min_hdrs = 5
> if ( not array_y_set_initial[1,6]) then # if number 1
> if (5 <= glob_max_terms) then # if number 2
> temporary := array_tmp6[5] * expt(glob_h , (1)) * factorial_3(4,5);
> array_y[6] := temporary;
> array_y_higher[1,6] := temporary;
> temporary := temporary / glob_h * (2.0);
> array_y_higher[2,5] := temporary
> ;
> fi;# end if 2
> ;
> fi;# end if 1
> ;
> kkk := 6;
> #END ATOMHDR5
> #BEGIN OUTFILE3
> #Top Atomall While Loop-- outfile3
> while (kkk <= glob_max_terms) do # do number 1
> #END OUTFILE3
> #BEGIN OUTFILE4
> #emit div LINEAR - LINEAR (NOP) $eq_no = 1 i = 1
> array_tmp5[kkk] := - array_tmp5[kkk-1] * array_tmp4[2] / array_tmp4[1];
> #emit NOT FULL - FULL add $eq_no = 1
> array_tmp6[kkk] := array_tmp5[kkk];
> #emit assign $eq_no = 1
> order_d := 1;
> if (kkk + order_d + 1 <= glob_max_terms) then # if number 1
> if ( not array_y_set_initial[1,kkk + order_d]) then # if number 2
> temporary := array_tmp6[kkk] * expt(glob_h , (order_d)) / factorial_3((kkk - 1),(kkk + order_d - 1));
> array_y[kkk + order_d] := temporary;
> array_y_higher[1,kkk + order_d] := temporary;
> term := kkk + order_d - 1;
> adj2 := 2;
> while ((adj2 <= order_d + 1) and (term >= 1)) do # do number 2
> temporary := temporary / glob_h * convfp(adj2);
> array_y_higher[adj2,term] := temporary;
> adj2 := adj2 + 1;
> term := term - 1;
> od;# end do number 2
> fi;# end if 2
> fi;# end if 1
> ;
> kkk := kkk + 1;
> od;# end do number 1
> ;
> #BOTTOM ATOMALL
> #END OUTFILE4
> #BEGIN OUTFILE5
>
> #BOTTOM ATOMALL ???
> # End Function number 8
> end;
atomall := proc()
local kkk, order_d, adj2, temporary, term;
global DEBUGMASSIVE, DEBUGL, INFO, ALWAYS, glob_iolevel, glob_max_terms,
glob_log10abserr, glob_orig_start_sec, glob_optimal_start,
glob_max_trunc_err, glob_log10_abserr, hours_in_day, glob_start,
glob_relerr, glob_hmin, glob_optimal_done, glob_subiter_method,
glob_normmax, glob_iter, glob_current_iter, glob_no_eqs, glob_abserr,
glob_good_digits, glob_curr_iter_when_opt, glob_smallish_float,
glob_last_good_h, glob_h, glob_disp_incr, glob_reached_optimal_h, glob_dump,
glob_html_log, glob_optimal_expect_sec, glob_warned, glob_unchanged_h_cnt,
glob_hmin_init, glob_clock_sec, djd_debug2, glob_max_sec, glob_log10_relerr,
glob_not_yet_finished, sec_in_minute, glob_log10normmin, glob_log10relerr,
glob_dump_analytic, glob_hmax, glob_not_yet_start_msg, glob_small_float,
glob_clock_start_sec, glob_display_flag, glob_max_minutes, glob_warned2,
glob_optimal_clock_start_sec, glob_max_rel_trunc_err, glob_max_hours,
glob_large_float, centuries_in_millinium, years_in_century, days_in_year,
min_in_hour, djd_debug, glob_max_iter, glob_look_poles, glob_percent_done,
MAX_UNCHANGED, glob_initial_pass, glob_almost_1, glob_max_opt_iter,
array_const_1, array_const_0D3, array_const_0D2, array_const_0D1,
array_const_0D0, array_y, array_x, array_m1, array_last_rel_error,
array_1st_rel_error, array_pole, array_fact_1, array_type_pole,
array_y_init, array_tmp0, array_tmp1, array_tmp2, array_tmp3, array_tmp4,
array_tmp5, array_tmp6, array_norms, array_poles, array_y_higher,
array_y_higher_work2, array_complex_pole, array_fact_2, array_y_set_initial,
array_y_higher_work, array_real_pole, glob_last;
array_tmp1[1] := array_const_0D1[1]*array_x[1];
array_tmp2[1] := array_tmp1[1] + array_const_0D2[1];
array_tmp3[1] := array_const_0D2[1]*array_x[1];
array_tmp4[1] := array_tmp3[1] + array_const_0D3[1];
array_tmp5[1] := array_tmp2[1]/array_tmp4[1];
array_tmp6[1] := array_const_0D0[1] + array_tmp5[1];
if not array_y_set_initial[1, 2] then
if 1 <= glob_max_terms then
temporary := array_tmp6[1]*expt(glob_h, 1)*factorial_3(0, 1);
array_y[2] := temporary;
array_y_higher[1, 2] := temporary;
temporary := temporary*2.0/glob_h;
array_y_higher[2, 1] := temporary
end if
end if;
kkk := 2;
array_tmp1[2] := array_const_0D1[1]*array_x[2];
array_tmp2[2] := array_tmp1[2];
array_tmp3[2] := array_const_0D2[1]*array_x[2];
array_tmp4[2] := array_tmp3[2];
array_tmp5[2] :=
(array_tmp2[2] - array_tmp5[1]*array_tmp4[2])/array_tmp4[1];
array_tmp6[2] := array_tmp5[2];
if not array_y_set_initial[1, 3] then
if 2 <= glob_max_terms then
temporary := array_tmp6[2]*expt(glob_h, 1)*factorial_3(1, 2);
array_y[3] := temporary;
array_y_higher[1, 3] := temporary;
temporary := temporary*2.0/glob_h;
array_y_higher[2, 2] := temporary
end if
end if;
kkk := 3;
array_tmp5[3] := -array_tmp5[2]*array_tmp4[2]/array_tmp4[1];
array_tmp6[3] := array_tmp5[3];
if not array_y_set_initial[1, 4] then
if 3 <= glob_max_terms then
temporary := array_tmp6[3]*expt(glob_h, 1)*factorial_3(2, 3);
array_y[4] := temporary;
array_y_higher[1, 4] := temporary;
temporary := temporary*2.0/glob_h;
array_y_higher[2, 3] := temporary
end if
end if;
kkk := 4;
array_tmp5[4] := -array_tmp5[3]*array_tmp4[2]/array_tmp4[1];
array_tmp6[4] := array_tmp5[4];
if not array_y_set_initial[1, 5] then
if 4 <= glob_max_terms then
temporary := array_tmp6[4]*expt(glob_h, 1)*factorial_3(3, 4);
array_y[5] := temporary;
array_y_higher[1, 5] := temporary;
temporary := temporary*2.0/glob_h;
array_y_higher[2, 4] := temporary
end if
end if;
kkk := 5;
array_tmp5[5] := -array_tmp5[4]*array_tmp4[2]/array_tmp4[1];
array_tmp6[5] := array_tmp5[5];
if not array_y_set_initial[1, 6] then
if 5 <= glob_max_terms then
temporary := array_tmp6[5]*expt(glob_h, 1)*factorial_3(4, 5);
array_y[6] := temporary;
array_y_higher[1, 6] := temporary;
temporary := temporary*2.0/glob_h;
array_y_higher[2, 5] := temporary
end if
end if;
kkk := 6;
while kkk <= glob_max_terms do
array_tmp5[kkk] := -array_tmp5[kkk - 1]*array_tmp4[2]/array_tmp4[1]
;
array_tmp6[kkk] := array_tmp5[kkk];
order_d := 1;
if kkk + order_d + 1 <= glob_max_terms then
if not array_y_set_initial[1, kkk + order_d] then
temporary := array_tmp6[kkk]*expt(glob_h, order_d)/
factorial_3(kkk - 1, kkk + order_d - 1);
array_y[kkk + order_d] := temporary;
array_y_higher[1, kkk + order_d] := temporary;
term := kkk + order_d - 1;
adj2 := 2;
while adj2 <= order_d + 1 and 1 <= term do
temporary := temporary*convfp(adj2)/glob_h;
array_y_higher[adj2, term] := temporary;
adj2 := adj2 + 1;
term := term - 1
end do
end if
end if;
kkk := kkk + 1
end do
end proc
> #BEGIN ATS LIBRARY BLOCK
> omniout_str := proc(iolevel,str)
> global glob_iolevel;
> if (glob_iolevel >= iolevel) then
> printf("%s\n",str);
> fi;
> # End Function number 1
> end;
omniout_str := proc(iolevel, str)
global glob_iolevel;
if iolevel <= glob_iolevel then printf("%s\n", str) end if
end proc
> omniout_str_noeol := proc(iolevel,str)
> global glob_iolevel;
> if (glob_iolevel >= iolevel) then
> printf("%s",str);
> fi;
> # End Function number 1
> end;
omniout_str_noeol := proc(iolevel, str)
global glob_iolevel;
if iolevel <= glob_iolevel then printf("%s", str) end if
end proc
> omniout_labstr := proc(iolevel,label,str)
> global glob_iolevel;
> if (glob_iolevel >= iolevel) then
> print(label,str);
> fi;
> # End Function number 1
> end;
omniout_labstr := proc(iolevel, label, str)
global glob_iolevel;
if iolevel <= glob_iolevel then print(label, str) end if
end proc
> omniout_float := proc(iolevel,prelabel,prelen,value,vallen,postlabel)
> global glob_iolevel;
> if (glob_iolevel >= iolevel) then
> if vallen = 4 then
> printf("%-30s = %-42.4g %s \n",prelabel,value, postlabel);
> else
> printf("%-30s = %-42.32g %s \n",prelabel,value, postlabel);
> fi;
> fi;
> # End Function number 1
> end;
omniout_float := proc(iolevel, prelabel, prelen, value, vallen, postlabel)
global glob_iolevel;
if iolevel <= glob_iolevel then
if vallen = 4 then
printf("%-30s = %-42.4g %s \n", prelabel, value, postlabel)
else printf("%-30s = %-42.32g %s \n", prelabel, value, postlabel)
end if
end if
end proc
> omniout_int := proc(iolevel,prelabel,prelen,value,vallen,postlabel)
> global glob_iolevel;
> if (glob_iolevel >= iolevel) then
> if vallen = 5 then
> printf("%-30s = %-32d %s\n",prelabel,value, postlabel);
> else
> printf("%-30s = %-32d %s \n",prelabel,value, postlabel);
> fi;
> fi;
> # End Function number 1
> end;
omniout_int := proc(iolevel, prelabel, prelen, value, vallen, postlabel)
global glob_iolevel;
if iolevel <= glob_iolevel then
if vallen = 5 then
printf("%-30s = %-32d %s\n", prelabel, value, postlabel)
else printf("%-30s = %-32d %s \n", prelabel, value, postlabel)
end if
end if
end proc
> omniout_float_arr := proc(iolevel,prelabel,elemnt,prelen,value,vallen,postlabel)
> global glob_iolevel;
> if (glob_iolevel >= iolevel) then
> print(prelabel,"[",elemnt,"]",value, postlabel);
> fi;
> # End Function number 1
> end;
omniout_float_arr := proc(
iolevel, prelabel, elemnt, prelen, value, vallen, postlabel)
global glob_iolevel;
if iolevel <= glob_iolevel then
print(prelabel, "[", elemnt, "]", value, postlabel)
end if
end proc
> dump_series := proc(iolevel,dump_label,series_name,
> array_series,numb)
> global glob_iolevel;
> local i;
> if (glob_iolevel >= iolevel) then
> i := 1;
> while (i <= numb) do
> print(dump_label,series_name
> ,i,array_series[i]);
> i := i + 1;
> od;
> fi;
> # End Function number 1
> end;
dump_series := proc(iolevel, dump_label, series_name, array_series, numb)
local i;
global glob_iolevel;
if iolevel <= glob_iolevel then
i := 1;
while i <= numb do
print(dump_label, series_name, i, array_series[i]); i := i + 1
end do
end if
end proc
> dump_series_2 := proc(iolevel,dump_label,series_name2,
> array_series2,numb,subnum,array_x)
> global glob_iolevel;
> local i,sub,ts_term;
> if (glob_iolevel >= iolevel) then
> sub := 1;
> while (sub <= subnum) do
> i := 1;
> while (i <= numb) do
> print(dump_label,series_name2,sub,i,array_series2[sub,i]);
> od;
> sub := sub + 1;
> od;
> fi;
> # End Function number 1
> end;
dump_series_2 := proc(
iolevel, dump_label, series_name2, array_series2, numb, subnum, array_x)
local i, sub, ts_term;
global glob_iolevel;
if iolevel <= glob_iolevel then
sub := 1;
while sub <= subnum do
i := 1;
while i <= numb do print(dump_label, series_name2, sub, i,
array_series2[sub, i])
end do;
sub := sub + 1
end do
end if
end proc
> cs_info := proc(iolevel,str)
> global glob_iolevel,glob_correct_start_flag,glob_h,glob_reached_optimal_h;
> if (glob_iolevel >= iolevel) then
> print("cs_info " , str , " glob_correct_start_flag = " , glob_correct_start_flag , "glob_h := " , glob_h , "glob_reached_optimal_h := " , glob_reached_optimal_h)
> fi;
> # End Function number 1
> end;
cs_info := proc(iolevel, str)
global
glob_iolevel, glob_correct_start_flag, glob_h, glob_reached_optimal_h;
if iolevel <= glob_iolevel then print("cs_info ", str,
" glob_correct_start_flag = ", glob_correct_start_flag,
"glob_h := ", glob_h, "glob_reached_optimal_h := ",
glob_reached_optimal_h)
end if
end proc
> # Begin Function number 2
> logitem_time := proc(fd,secs_in)
> global centuries_in_millinium, days_in_year, hours_in_day, min_in_hour, sec_in_minute, years_in_century;
> local cent_int, centuries, days, days_int, hours, hours_int, millinium_int, milliniums, minutes, minutes_int, sec_in_millinium, sec_int, seconds, secs, years, years_int;
> secs := (secs_in);
> if (secs >= 0.0) then # if number 1
> sec_in_millinium := convfloat(sec_in_minute * min_in_hour * hours_in_day * days_in_year * years_in_century * centuries_in_millinium);
> milliniums := convfloat(secs / sec_in_millinium);
> millinium_int := floor(milliniums);
> centuries := (milliniums - millinium_int)*centuries_in_millinium;
> cent_int := floor(centuries);
> years := (centuries - cent_int) * years_in_century;
> years_int := floor(years);
> days := (years - years_int) * days_in_year;
> days_int := floor(days);
> hours := (days - days_int) * hours_in_day;
> hours_int := floor(hours);
> minutes := (hours - hours_int) * min_in_hour;
> minutes_int := floor(minutes);
> seconds := (minutes - minutes_int) * sec_in_minute;
> sec_int := floor(seconds);
> fprintf(fd,"
");
> if (millinium_int > 0) then # if number 2
> fprintf(fd,"%d Millinia %d Centuries %d Years %d Days %d Hours %d Minutes %d Seconds",millinium_int,cent_int,years_int,days_int,hours_int,minutes_int,sec_int);
> elif (cent_int > 0) then # if number 3
> fprintf(fd,"%d Centuries %d Years %d Days %d Hours %d Minutes %d Seconds",cent_int,years_int,days_int,hours_int,minutes_int,sec_int);
> elif (years_int > 0) then # if number 4
> fprintf(fd,"%d Years %d Days %d Hours %d Minutes %d Seconds",years_int,days_int,hours_int,minutes_int,sec_int);
> elif (days_int > 0) then # if number 5
> fprintf(fd,"%d Days %d Hours %d Minutes %d Seconds",days_int,hours_int,minutes_int,sec_int);
> elif (hours_int > 0) then # if number 6
> fprintf(fd,"%d Hours %d Minutes %d Seconds",hours_int,minutes_int,sec_int);
> elif (minutes_int > 0) then # if number 7
> fprintf(fd,"%d Minutes %d Seconds",minutes_int,sec_int);
> else
> fprintf(fd,"%d Seconds",sec_int);
> fi;# end if 7
> else
> fprintf(fd,"Unknown");
> fi;# end if 6
> fprintf(fd," | ");
> # End Function number 2
> end;
logitem_time := proc(fd, secs_in)
local cent_int, centuries, days, days_int, hours, hours_int, millinium_int,
milliniums, minutes, minutes_int, sec_in_millinium, sec_int, seconds, secs,
years, years_int;
global centuries_in_millinium, days_in_year, hours_in_day, min_in_hour,
sec_in_minute, years_in_century;
secs := secs_in;
if 0. <= secs then
sec_in_millinium := convfloat(sec_in_minute*min_in_hour*
hours_in_day*days_in_year*years_in_century*
centuries_in_millinium);
milliniums := convfloat(secs/sec_in_millinium);
millinium_int := floor(milliniums);
centuries := (milliniums - millinium_int)*centuries_in_millinium;
cent_int := floor(centuries);
years := (centuries - cent_int)*years_in_century;
years_int := floor(years);
days := (years - years_int)*days_in_year;
days_int := floor(days);
hours := (days - days_int)*hours_in_day;
hours_int := floor(hours);
minutes := (hours - hours_int)*min_in_hour;
minutes_int := floor(minutes);
seconds := (minutes - minutes_int)*sec_in_minute;
sec_int := floor(seconds);
fprintf(fd, "");
if 0 < millinium_int then fprintf(fd, "%d Millinia %d Centuries %\
d Years %d Days %d Hours %d Minutes %d Seconds", millinium_int,
cent_int, years_int, days_int, hours_int, minutes_int, sec_int)
elif 0 < cent_int then fprintf(fd,
"%d Centuries %d Years %d Days %d Hours %d Minutes %d Seconds",
cent_int, years_int, days_int, hours_int, minutes_int, sec_int)
elif 0 < years_int then fprintf(fd,
"%d Years %d Days %d Hours %d Minutes %d Seconds", years_int,
days_int, hours_int, minutes_int, sec_int)
elif 0 < days_int then fprintf(fd,
"%d Days %d Hours %d Minutes %d Seconds", days_int, hours_int,
minutes_int, sec_int)
elif 0 < hours_int then fprintf(fd,
"%d Hours %d Minutes %d Seconds", hours_int, minutes_int,
sec_int)
elif 0 < minutes_int then
fprintf(fd, "%d Minutes %d Seconds", minutes_int, sec_int)
else fprintf(fd, "%d Seconds", sec_int)
end if
else fprintf(fd, "Unknown")
end if;
fprintf(fd, " | ")
end proc
> omniout_timestr := proc (secs_in)
> global centuries_in_millinium, days_in_year, hours_in_day, min_in_hour, sec_in_minute, years_in_century;
> local cent_int, centuries, days, days_int, hours, hours_int, millinium_int, milliniums, minutes, minutes_int, sec_in_millinium, sec_int, seconds, secs, years, years_int;
> secs := convfloat(secs_in);
> if (secs >= 0.0) then # if number 6
> sec_in_millinium := convfloat(sec_in_minute * min_in_hour * hours_in_day * days_in_year * years_in_century * centuries_in_millinium);
> milliniums := convfloat(secs / sec_in_millinium);
> millinium_int := floor(milliniums);
> centuries := (milliniums - millinium_int)*centuries_in_millinium;
> cent_int := floor(centuries);
> years := (centuries - cent_int) * years_in_century;
> years_int := floor(years);
> days := (years - years_int) * days_in_year;
> days_int := floor(days);
> hours := (days - days_int) * hours_in_day;
> hours_int := floor(hours);
> minutes := (hours - hours_int) * min_in_hour;
> minutes_int := floor(minutes);
> seconds := (minutes - minutes_int) * sec_in_minute;
> sec_int := floor(seconds);
>
> if (millinium_int > 0) then # if number 7
> printf(" = %d Millinia %d Centuries %d Years %d Days %d Hours %d Minutes %d Seconds\n",millinium_int,cent_int,years_int,days_int,hours_int,minutes_int,sec_int);
> elif (cent_int > 0) then # if number 8
> printf(" = %d Centuries %d Years %d Days %d Hours %d Minutes %d Seconds\n",cent_int,years_int,days_int,hours_int,minutes_int,sec_int);
> elif (years_int > 0) then # if number 9
> printf(" = %d Years %d Days %d Hours %d Minutes %d Seconds\n",years_int,days_int,hours_int,minutes_int,sec_int);
> elif (days_int > 0) then # if number 10
> printf(" = %d Days %d Hours %d Minutes %d Seconds\n",days_int,hours_int,minutes_int,sec_int);
> elif (hours_int > 0) then # if number 11
> printf(" = %d Hours %d Minutes %d Seconds\n",hours_int,minutes_int,sec_int);
> elif (minutes_int > 0) then # if number 12
> printf(" = %d Minutes %d Seconds\n",minutes_int,sec_int);
> else
> printf(" = %d Seconds\n",sec_int);
> fi;# end if 12
> else
> printf(" Unknown\n");
> fi;# end if 11
> # End Function number 2
> end;
omniout_timestr := proc(secs_in)
local cent_int, centuries, days, days_int, hours, hours_int, millinium_int,
milliniums, minutes, minutes_int, sec_in_millinium, sec_int, seconds, secs,
years, years_int;
global centuries_in_millinium, days_in_year, hours_in_day, min_in_hour,
sec_in_minute, years_in_century;
secs := convfloat(secs_in);
if 0. <= secs then
sec_in_millinium := convfloat(sec_in_minute*min_in_hour*
hours_in_day*days_in_year*years_in_century*
centuries_in_millinium);
milliniums := convfloat(secs/sec_in_millinium);
millinium_int := floor(milliniums);
centuries := (milliniums - millinium_int)*centuries_in_millinium;
cent_int := floor(centuries);
years := (centuries - cent_int)*years_in_century;
years_int := floor(years);
days := (years - years_int)*days_in_year;
days_int := floor(days);
hours := (days - days_int)*hours_in_day;
hours_int := floor(hours);
minutes := (hours - hours_int)*min_in_hour;
minutes_int := floor(minutes);
seconds := (minutes - minutes_int)*sec_in_minute;
sec_int := floor(seconds);
if 0 < millinium_int then printf(" = %d Millinia %d Centuries %d\
Years %d Days %d Hours %d Minutes %d Seconds\n", millinium_int,
cent_int, years_int, days_int, hours_int, minutes_int, sec_int)
elif 0 < cent_int then printf(" = %d Centuries %d Years %d Days \
%d Hours %d Minutes %d Seconds\n", cent_int, years_int,
days_int, hours_int, minutes_int, sec_int)
elif 0 < years_int then printf(
" = %d Years %d Days %d Hours %d Minutes %d Seconds\n",
years_int, days_int, hours_int, minutes_int, sec_int)
elif 0 < days_int then printf(
" = %d Days %d Hours %d Minutes %d Seconds\n", days_int,
hours_int, minutes_int, sec_int)
elif 0 < hours_int then printf(
" = %d Hours %d Minutes %d Seconds\n", hours_int, minutes_int,
sec_int)
elif 0 < minutes_int then
printf(" = %d Minutes %d Seconds\n", minutes_int, sec_int)
else printf(" = %d Seconds\n", sec_int)
end if
else printf(" Unknown\n")
end if
end proc
> # Begin Function number 3
> ats := proc(
> mmm_ats,array_a,array_b,jjj_ats)
> local iii_ats, lll_ats,ma_ats, ret_ats;
>
>
>
>
>
> ret_ats := 0.0;
> if (jjj_ats <= mmm_ats) then # if number 11
> ma_ats := mmm_ats + 1;
> iii_ats := jjj_ats;
> while (iii_ats <= mmm_ats) do # do number 1
> lll_ats := ma_ats - iii_ats;
> ret_ats := ret_ats + array_a[iii_ats]*array_b[lll_ats];
> iii_ats := iii_ats + 1;
> od;# end do number 1
> fi;# end if 11
> ;
> ret_ats;
>
> # End Function number 3
> end;
ats := proc(mmm_ats, array_a, array_b, jjj_ats)
local iii_ats, lll_ats, ma_ats, ret_ats;
ret_ats := 0.;
if jjj_ats <= mmm_ats then
ma_ats := mmm_ats + 1;
iii_ats := jjj_ats;
while iii_ats <= mmm_ats do
lll_ats := ma_ats - iii_ats;
ret_ats := ret_ats + array_a[iii_ats]*array_b[lll_ats];
iii_ats := iii_ats + 1
end do
end if;
ret_ats
end proc
> # Begin Function number 4
> att := proc(
> mmm_att,array_aa,array_bb,jjj_att)
> global glob_max_terms;
> local al_att, iii_att,lll_att, ma_att, ret_att;
>
>
>
>
>
> ret_att := 0.0;
> if (jjj_att <= mmm_att) then # if number 11
> ma_att := mmm_att + 2;
> iii_att := jjj_att;
> while (iii_att <= mmm_att) do # do number 1
> lll_att := ma_att - iii_att;
> al_att := (lll_att - 1);
> if (lll_att <= glob_max_terms) then # if number 12
> ret_att := ret_att + array_aa[iii_att]*array_bb[lll_att]* convfp(al_att);
> fi;# end if 12
> ;
> iii_att := iii_att + 1;
> od;# end do number 1
> ;
> ret_att := ret_att / convfp(mmm_att) ;
> fi;# end if 11
> ;
> ret_att;
>
> # End Function number 4
> end;
att := proc(mmm_att, array_aa, array_bb, jjj_att)
local al_att, iii_att, lll_att, ma_att, ret_att;
global glob_max_terms;
ret_att := 0.;
if jjj_att <= mmm_att then
ma_att := mmm_att + 2;
iii_att := jjj_att;
while iii_att <= mmm_att do
lll_att := ma_att - iii_att;
al_att := lll_att - 1;
if lll_att <= glob_max_terms then ret_att := ret_att
+ array_aa[iii_att]*array_bb[lll_att]*convfp(al_att)
end if;
iii_att := iii_att + 1
end do;
ret_att := ret_att/convfp(mmm_att)
end if;
ret_att
end proc
> # Begin Function number 5
> display_pole := proc()
> global ALWAYS,glob_display_flag, glob_large_float, array_pole;
> if ((array_pole[1] <> glob_large_float) and (array_pole[1] > 0.0) and (array_pole[2] <> glob_large_float) and (array_pole[2]> 0.0) and glob_display_flag) then # if number 11
> omniout_float(ALWAYS,"Radius of convergence ",4, array_pole[1],4," ");
> omniout_float(ALWAYS,"Order of pole ",4, array_pole[2],4," ");
> fi;# end if 11
> # End Function number 5
> end;
display_pole := proc()
global ALWAYS, glob_display_flag, glob_large_float, array_pole;
if array_pole[1] <> glob_large_float and 0. < array_pole[1] and
array_pole[2] <> glob_large_float and 0. < array_pole[2] and
glob_display_flag then
omniout_float(ALWAYS, "Radius of convergence ", 4,
array_pole[1], 4, " ");
omniout_float(ALWAYS, "Order of pole ", 4,
array_pole[2], 4, " ")
end if
end proc
> # Begin Function number 6
> logditto := proc(file)
> fprintf(file,"");
> fprintf(file,"ditto");
> fprintf(file," | ");
> # End Function number 6
> end;
logditto := proc(file)
fprintf(file, ""); fprintf(file, "ditto"); fprintf(file, " | ")
end proc
> # Begin Function number 7
> logitem_integer := proc(file,n)
> fprintf(file,"");
> fprintf(file,"%d",n);
> fprintf(file," | ");
> # End Function number 7
> end;
logitem_integer := proc(file, n)
fprintf(file, ""); fprintf(file, "%d", n); fprintf(file, " | ")
end proc
> # Begin Function number 8
> logitem_str := proc(file,str)
> fprintf(file,"");
> fprintf(file,str);
> fprintf(file," | ");
> # End Function number 8
> end;
logitem_str := proc(file, str)
fprintf(file, ""); fprintf(file, str); fprintf(file, " | ")
end proc
> # Begin Function number 9
> log_revs := proc(file,revs)
> fprintf(file,revs);
> # End Function number 9
> end;
log_revs := proc(file, revs) fprintf(file, revs) end proc
> # Begin Function number 10
> logitem_float := proc(file,x)
> fprintf(file,"");
> fprintf(file,"%g",x);
> fprintf(file," | ");
> # End Function number 10
> end;
logitem_float := proc(file, x)
fprintf(file, ""); fprintf(file, "%g", x); fprintf(file, " | ")
end proc
> # Begin Function number 11
> logitem_pole := proc(file,pole)
> fprintf(file,"");
> if (pole = 0) then # if number 11
> fprintf(file,"NA");
> elif (pole = 1) then # if number 12
> fprintf(file,"Real");
> elif (pole = 2) then # if number 13
> fprintf(file,"Complex");
> else
> fprintf(file,"No Pole");
> fi;# end if 13
> fprintf(file," | ");
> # End Function number 11
> end;
logitem_pole := proc(file, pole)
fprintf(file, "");
if pole = 0 then fprintf(file, "NA")
elif pole = 1 then fprintf(file, "Real")
elif pole = 2 then fprintf(file, "Complex")
else fprintf(file, "No Pole")
end if;
fprintf(file, " | ")
end proc
> # Begin Function number 12
> logstart := proc(file)
> fprintf(file,"");
> # End Function number 12
> end;
logstart := proc(file) fprintf(file, "
") end proc
> # Begin Function number 13
> logend := proc(file)
> fprintf(file,"
\n");
> # End Function number 13
> end;
logend := proc(file) fprintf(file, "\n") end proc
> # Begin Function number 14
> chk_data := proc()
> global glob_max_iter,ALWAYS, glob_max_terms;
> local errflag;
>
>
>
> errflag := false;
>
> if ((glob_max_terms < 15) or (glob_max_terms > 512)) then # if number 13
> omniout_str(ALWAYS,"Illegal max_terms = -- Using 30");
> glob_max_terms := 30;
> fi;# end if 13
> ;
> if (glob_max_iter < 2) then # if number 13
> omniout_str(ALWAYS,"Illegal max_iter");
> errflag := true;
> fi;# end if 13
> ;
> if (errflag) then # if number 13
>
> quit;
> fi;# end if 13
>
> # End Function number 14
> end;
chk_data := proc()
local errflag;
global glob_max_iter, ALWAYS, glob_max_terms;
errflag := false;
if glob_max_terms < 15 or 512 < glob_max_terms then
omniout_str(ALWAYS, "Illegal max_terms = -- Using 30");
glob_max_terms := 30
end if;
if glob_max_iter < 2 then
omniout_str(ALWAYS, "Illegal max_iter"); errflag := true
end if;
if errflag then quit end if
end proc
> # Begin Function number 15
> comp_expect_sec := proc(t_end2,t_start2,t2,clock_sec2)
> global glob_small_float;
> local ms2, rrr, sec_left, sub1, sub2;
>
>
>
> ;
> ms2 := clock_sec2;
> sub1 := (t_end2-t_start2);
> sub2 := (t2-t_start2);
> if (sub1 = 0.0) then # if number 13
> sec_left := 0.0;
> else
> if (sub2 > 0.0) then # if number 14
> rrr := (sub1/sub2);
> sec_left := rrr * ms2 - ms2;
> else
> sec_left := 0.0;
> fi;# end if 14
> fi;# end if 13
> ;
> sec_left;
>
> # End Function number 15
> end;
comp_expect_sec := proc(t_end2, t_start2, t2, clock_sec2)
local ms2, rrr, sec_left, sub1, sub2;
global glob_small_float;
ms2 := clock_sec2;
sub1 := t_end2 - t_start2;
sub2 := t2 - t_start2;
if sub1 = 0. then sec_left := 0.
else
if 0. < sub2 then rrr := sub1/sub2; sec_left := rrr*ms2 - ms2
else sec_left := 0.
end if
end if;
sec_left
end proc
> # Begin Function number 16
> comp_percent := proc(t_end2,t_start2, t2)
> global glob_small_float;
> local rrr, sub1, sub2;
>
>
>
> sub1 := (t_end2-t_start2);
> sub2 := (t2-t_start2);
> if (sub2 > glob_small_float) then # if number 13
> rrr := (100.0*sub2)/sub1;
> else
> rrr := 0.0;
> fi;# end if 13
> ;
> rrr;
>
> # End Function number 16
> end;
comp_percent := proc(t_end2, t_start2, t2)
local rrr, sub1, sub2;
global glob_small_float;
sub1 := t_end2 - t_start2;
sub2 := t2 - t_start2;
if glob_small_float < sub2 then rrr := 100.0*sub2/sub1
else rrr := 0.
end if;
rrr
end proc
> # Begin Function number 17
> factorial_2 := proc(nnn)
> local ret;
>
>
>
> ret := nnn!;
>
> # End Function number 17
> end;
factorial_2 := proc(nnn) local ret; ret := nnn! end proc
> # Begin Function number 18
> factorial_1 := proc(nnn)
> global glob_max_terms,array_fact_1;
> local ret;
>
>
>
> if (nnn <= glob_max_terms) then # if number 13
> if (array_fact_1[nnn] = 0) then # if number 14
> ret := factorial_2(nnn);
> array_fact_1[nnn] := ret;
> else
> ret := array_fact_1[nnn];
> fi;# end if 14
> ;
> else
> ret := factorial_2(nnn);
> fi;# end if 13
> ;
> ret;
>
> # End Function number 18
> end;
factorial_1 := proc(nnn)
local ret;
global glob_max_terms, array_fact_1;
if nnn <= glob_max_terms then
if array_fact_1[nnn] = 0 then
ret := factorial_2(nnn); array_fact_1[nnn] := ret
else ret := array_fact_1[nnn]
end if
else ret := factorial_2(nnn)
end if;
ret
end proc
> # Begin Function number 19
> factorial_3 := proc(mmm,nnn)
> global glob_max_terms,array_fact_2;
> local ret;
>
>
>
> if ((nnn <= glob_max_terms) and (mmm <= glob_max_terms)) then # if number 13
> if (array_fact_2[mmm,nnn] = 0) then # if number 14
> ret := factorial_1(mmm)/factorial_1(nnn);
> array_fact_2[mmm,nnn] := ret;
> else
> ret := array_fact_2[mmm,nnn];
> fi;# end if 14
> ;
> else
> ret := factorial_2(mmm)/factorial_2(nnn);
> fi;# end if 13
> ;
> ret;
>
> # End Function number 19
> end;
factorial_3 := proc(mmm, nnn)
local ret;
global glob_max_terms, array_fact_2;
if nnn <= glob_max_terms and mmm <= glob_max_terms then
if array_fact_2[mmm, nnn] = 0 then
ret := factorial_1(mmm)/factorial_1(nnn);
array_fact_2[mmm, nnn] := ret
else ret := array_fact_2[mmm, nnn]
end if
else ret := factorial_2(mmm)/factorial_2(nnn)
end if;
ret
end proc
> # Begin Function number 20
> convfp := proc(mmm)
> (mmm);
>
> # End Function number 20
> end;
convfp := proc(mmm) mmm end proc
> # Begin Function number 21
> convfloat := proc(mmm)
> (mmm);
>
> # End Function number 21
> end;
convfloat := proc(mmm) mmm end proc
> elapsed_time_seconds := proc()
> time();
> end;
elapsed_time_seconds := proc() time() end proc
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> omniabs := proc(x)
> abs(x);
> end;
omniabs := proc(x) abs(x) end proc
> expt := proc(x,y)
> (x^y);
> end;
expt := proc(x, y) x^y end proc
> #END ATS LIBRARY BLOCK
> #BEGIN USER DEF BLOCK
> #BEGIN USER DEF BLOCK
> exact_soln_y := proc(x)
> return(0.5 * x + 0.25 * ln(2.0 * x + 3.0));
> end;
exact_soln_y := proc(x) return 0.5*x + 0.25*ln(2.0*x + 3.0) end proc
> #END USER DEF BLOCK
> #END USER DEF BLOCK
> #END OUTFILE5
> # Begin Function number 2
> main := proc()
> #BEGIN OUTFIEMAIN
> local d1,d2,d3,d4,est_err_2,niii,done_once,
> term,ord,order_diff,term_no,html_log_file,iiif,jjjf,
> rows,r_order,sub_iter,calc_term,iii,temp_sum,current_iter,
> x_start,x_end
> ,it, log10norm, max_terms, opt_iter, tmp,subiter;
> global
> DEBUGMASSIVE,
> DEBUGL,
> INFO,
> ALWAYS,
> glob_iolevel,
> glob_max_terms,
> #Top Generate Globals Decl
> glob_log10abserr,
> glob_orig_start_sec,
> glob_optimal_start,
> glob_max_trunc_err,
> glob_log10_abserr,
> hours_in_day,
> glob_start,
> glob_relerr,
> glob_hmin,
> glob_optimal_done,
> glob_subiter_method,
> glob_normmax,
> glob_iter,
> glob_current_iter,
> glob_no_eqs,
> glob_abserr,
> glob_good_digits,
> glob_curr_iter_when_opt,
> glob_smallish_float,
> glob_last_good_h,
> glob_h,
> glob_disp_incr,
> glob_reached_optimal_h,
> glob_dump,
> glob_html_log,
> glob_optimal_expect_sec,
> glob_warned,
> glob_unchanged_h_cnt,
> glob_hmin_init,
> glob_clock_sec,
> djd_debug2,
> glob_max_sec,
> glob_log10_relerr,
> glob_not_yet_finished,
> sec_in_minute,
> glob_log10normmin,
> glob_log10relerr,
> glob_dump_analytic,
> glob_hmax,
> glob_not_yet_start_msg,
> glob_small_float,
> glob_clock_start_sec,
> glob_display_flag,
> glob_max_minutes,
> glob_warned2,
> glob_optimal_clock_start_sec,
> glob_max_rel_trunc_err,
> glob_max_hours,
> glob_large_float,
> centuries_in_millinium,
> years_in_century,
> days_in_year,
> min_in_hour,
> djd_debug,
> glob_max_iter,
> glob_look_poles,
> glob_percent_done,
> MAX_UNCHANGED,
> glob_initial_pass,
> glob_almost_1,
> glob_max_opt_iter,
> #Bottom Generate Globals Decl
> #BEGIN CONST
> array_const_1,
> array_const_0D3,
> array_const_0D2,
> array_const_0D1,
> array_const_0D0,
> #END CONST
> array_y,
> array_x,
> array_m1,
> array_last_rel_error,
> array_1st_rel_error,
> array_pole,
> array_fact_1,
> array_type_pole,
> array_y_init,
> array_tmp0,
> array_tmp1,
> array_tmp2,
> array_tmp3,
> array_tmp4,
> array_tmp5,
> array_tmp6,
> array_norms,
> array_poles,
> array_y_higher,
> array_y_higher_work2,
> array_complex_pole,
> array_fact_2,
> array_y_set_initial,
> array_y_higher_work,
> array_real_pole,
> glob_last;
> glob_last;
> ALWAYS := 1;
> INFO := 2;
> DEBUGL := 3;
> DEBUGMASSIVE := 4;
> glob_iolevel := INFO;
> DEBUGMASSIVE := 4;
> DEBUGL := 3;
> INFO := 2;
> ALWAYS := 1;
> glob_iolevel := 5;
> glob_max_terms := 30;
> glob_log10abserr := 0.0;
> glob_orig_start_sec := 0.0;
> glob_optimal_start := 0.0;
> glob_max_trunc_err := 0.1e-10;
> glob_log10_abserr := 0.1e-10;
> hours_in_day := 24;
> glob_start := 0;
> glob_relerr := 0.1e-10;
> glob_hmin := 0.00000000001;
> glob_optimal_done := false;
> glob_subiter_method := 3;
> glob_normmax := 0.0;
> glob_iter := 0;
> glob_current_iter := 0;
> glob_no_eqs := 0;
> glob_abserr := 0.1e-10;
> glob_good_digits := 0;
> glob_curr_iter_when_opt := 0;
> glob_smallish_float := 0.1e-100;
> glob_last_good_h := 0.1;
> glob_h := 0.1;
> glob_disp_incr := 0.1;
> glob_reached_optimal_h := false;
> glob_dump := false;
> glob_html_log := true;
> glob_optimal_expect_sec := 0.1;
> glob_warned := false;
> glob_unchanged_h_cnt := 0;
> glob_hmin_init := 0.001;
> glob_clock_sec := 0.0;
> djd_debug2 := true;
> glob_max_sec := 10000.0;
> glob_log10_relerr := 0.1e-10;
> glob_not_yet_finished := true;
> sec_in_minute := 60;
> glob_log10normmin := 0.1;
> glob_log10relerr := 0.0;
> glob_dump_analytic := false;
> glob_hmax := 1.0;
> glob_not_yet_start_msg := true;
> glob_small_float := 0.1e-50;
> glob_clock_start_sec := 0.0;
> glob_display_flag := true;
> glob_max_minutes := 0.0;
> glob_warned2 := false;
> glob_optimal_clock_start_sec := 0.0;
> glob_max_rel_trunc_err := 0.1e-10;
> glob_max_hours := 0.0;
> glob_large_float := 9.0e100;
> centuries_in_millinium := 10;
> years_in_century := 100;
> days_in_year := 365;
> min_in_hour := 60;
> djd_debug := true;
> glob_max_iter := 1000;
> glob_look_poles := false;
> glob_percent_done := 0.0;
> MAX_UNCHANGED := 10;
> glob_initial_pass := true;
> glob_almost_1 := 0.9990;
> glob_max_opt_iter := 10;
> #Write Set Defaults
> glob_orig_start_sec := elapsed_time_seconds();
> MAX_UNCHANGED := 10;
> glob_curr_iter_when_opt := 0;
> glob_display_flag := true;
> glob_no_eqs := 1;
> glob_iter := -1;
> opt_iter := -1;
> glob_max_iter := 50000;
> glob_max_hours := 0.0;
> glob_max_minutes := 15.0;
> omniout_str(ALWAYS,"##############ECHO OF PROBLEM#################");
> omniout_str(ALWAYS,"##############temp/div_lin_linpostode.ode#################");
> omniout_str(ALWAYS,"diff ( y , x , 1 ) = (0.1 * x + 0.2) / (0.2 * x + 0.3);");
> omniout_str(ALWAYS,"!");
> omniout_str(ALWAYS,"#BEGIN FIRST INPUT BLOCK");
> omniout_str(ALWAYS,"Digits := 32;");
> omniout_str(ALWAYS,"max_terms := 30;");
> omniout_str(ALWAYS,"!");
> omniout_str(ALWAYS,"#END FIRST INPUT BLOCK");
> omniout_str(ALWAYS,"#BEGIN SECOND INPUT BLOCK");
> omniout_str(ALWAYS,"x_start := 0.1;");
> omniout_str(ALWAYS,"x_end := 5.0 ;");
> omniout_str(ALWAYS,"array_y_init[0 + 1] := exact_soln_y(x_start);");
> omniout_str(ALWAYS,"glob_h := 0.05;");
> omniout_str(ALWAYS,"glob_look_poles := true;");
> omniout_str(ALWAYS,"glob_max_iter := 1000000;");
> omniout_str(ALWAYS,"#END SECOND INPUT BLOCK");
> omniout_str(ALWAYS,"#BEGIN OVERRIDE BLOCK");
> omniout_str(ALWAYS,"glob_h := 0.00001 ;");
> omniout_str(ALWAYS,"glob_look_poles := true;");
> omniout_str(ALWAYS,"glob_max_iter := 100;");
> omniout_str(ALWAYS,"glob_max_minutes := 1;");
> omniout_str(ALWAYS,"#END OVERRIDE BLOCK");
> omniout_str(ALWAYS,"!");
> omniout_str(ALWAYS,"#BEGIN USER DEF BLOCK");
> omniout_str(ALWAYS,"exact_soln_y := proc(x)");
> omniout_str(ALWAYS,"return(0.5 * x + 0.25 * ln(2.0 * x + 3.0));");
> omniout_str(ALWAYS,"end;");
> omniout_str(ALWAYS,"#END USER DEF BLOCK");
> omniout_str(ALWAYS,"#######END OF ECHO OF PROBLEM#################");
> glob_unchanged_h_cnt := 0;
> glob_warned := false;
> glob_warned2 := false;
> glob_small_float := 1.0e-200;
> glob_smallish_float := 1.0e-64;
> glob_large_float := 1.0e100;
> glob_almost_1 := 0.99;
> glob_log10_abserr := -8.0;
> glob_log10_relerr := -8.0;
> glob_hmax := 0.01;
> #BEGIN FIRST INPUT BLOCK
> #BEGIN FIRST INPUT BLOCK
> Digits := 32;
> max_terms := 30;
> #END FIRST INPUT BLOCK
> #START OF INITS AFTER INPUT BLOCK
> glob_max_terms := max_terms;
> glob_html_log := true;
> #END OF INITS AFTER INPUT BLOCK
> array_y:= Array(0..(max_terms + 1),[]);
> array_x:= Array(0..(max_terms + 1),[]);
> array_m1:= Array(0..(max_terms + 1),[]);
> array_last_rel_error:= Array(0..(max_terms + 1),[]);
> array_1st_rel_error:= Array(0..(max_terms + 1),[]);
> array_pole:= Array(0..(max_terms + 1),[]);
> array_fact_1:= Array(0..(max_terms + 1),[]);
> array_type_pole:= Array(0..(max_terms + 1),[]);
> array_y_init:= Array(0..(max_terms + 1),[]);
> array_tmp0:= Array(0..(max_terms + 1),[]);
> array_tmp1:= Array(0..(max_terms + 1),[]);
> array_tmp2:= Array(0..(max_terms + 1),[]);
> array_tmp3:= Array(0..(max_terms + 1),[]);
> array_tmp4:= Array(0..(max_terms + 1),[]);
> array_tmp5:= Array(0..(max_terms + 1),[]);
> array_tmp6:= Array(0..(max_terms + 1),[]);
> array_norms:= Array(0..(max_terms + 1),[]);
> array_poles := Array(0..(1+ 1) ,(0..3+ 1),[]);
> array_y_higher := Array(0..(2+ 1) ,(0..max_terms+ 1),[]);
> array_y_higher_work2 := Array(0..(2+ 1) ,(0..max_terms+ 1),[]);
> array_complex_pole := Array(0..(1+ 1) ,(0..3+ 1),[]);
> array_fact_2 := Array(0..(max_terms+ 1) ,(0..max_terms+ 1),[]);
> array_y_set_initial := Array(0..(2+ 1) ,(0..max_terms+ 1),[]);
> array_y_higher_work := Array(0..(2+ 1) ,(0..max_terms+ 1),[]);
> array_real_pole := Array(0..(1+ 1) ,(0..3+ 1),[]);
> term := 1;
> while (term <= max_terms) do # do number 2
> array_y[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_x[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_m1[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_last_rel_error[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_1st_rel_error[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_pole[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_fact_1[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_type_pole[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_y_init[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_tmp0[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_tmp1[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_tmp2[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_tmp3[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_tmp4[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_tmp5[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_tmp6[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> term := 1;
> while (term <= max_terms) do # do number 2
> array_norms[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> ord := 1;
> while (ord <=1) do # do number 2
> term := 1;
> while (term <= 3) do # do number 3
> array_poles[ord,term] := 0.0;
> term := term + 1;
> od;# end do number 3
> ;
> ord := ord + 1;
> od;# end do number 2
> ;
> ord := 1;
> while (ord <=2) do # do number 2
> term := 1;
> while (term <= max_terms) do # do number 3
> array_y_higher[ord,term] := 0.0;
> term := term + 1;
> od;# end do number 3
> ;
> ord := ord + 1;
> od;# end do number 2
> ;
> ord := 1;
> while (ord <=2) do # do number 2
> term := 1;
> while (term <= max_terms) do # do number 3
> array_y_higher_work2[ord,term] := 0.0;
> term := term + 1;
> od;# end do number 3
> ;
> ord := ord + 1;
> od;# end do number 2
> ;
> ord := 1;
> while (ord <=1) do # do number 2
> term := 1;
> while (term <= 3) do # do number 3
> array_complex_pole[ord,term] := 0.0;
> term := term + 1;
> od;# end do number 3
> ;
> ord := ord + 1;
> od;# end do number 2
> ;
> ord := 1;
> while (ord <=max_terms) do # do number 2
> term := 1;
> while (term <= max_terms) do # do number 3
> array_fact_2[ord,term] := 0.0;
> term := term + 1;
> od;# end do number 3
> ;
> ord := ord + 1;
> od;# end do number 2
> ;
> ord := 1;
> while (ord <=2) do # do number 2
> term := 1;
> while (term <= max_terms) do # do number 3
> array_y_set_initial[ord,term] := 0.0;
> term := term + 1;
> od;# end do number 3
> ;
> ord := ord + 1;
> od;# end do number 2
> ;
> ord := 1;
> while (ord <=2) do # do number 2
> term := 1;
> while (term <= max_terms) do # do number 3
> array_y_higher_work[ord,term] := 0.0;
> term := term + 1;
> od;# end do number 3
> ;
> ord := ord + 1;
> od;# end do number 2
> ;
> ord := 1;
> while (ord <=1) do # do number 2
> term := 1;
> while (term <= 3) do # do number 3
> array_real_pole[ord,term] := 0.0;
> term := term + 1;
> od;# end do number 3
> ;
> ord := ord + 1;
> od;# end do number 2
> ;
> #BEGIN ARRAYS DEFINED AND INITIALIZATED
> array_x := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_x[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_y := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_y[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_tmp6 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_tmp6[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_tmp5 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_tmp5[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_tmp4 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_tmp4[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_tmp3 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_tmp3[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_tmp2 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_tmp2[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_tmp1 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_tmp1[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_tmp0 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_tmp0[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_const_1 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_const_1[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_const_1[1] := 1;
> array_const_0D3 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_const_0D3[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_const_0D3[1] := 0.3;
> array_const_0D2 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_const_0D2[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_const_0D2[1] := 0.2;
> array_const_0D1 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_const_0D1[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_const_0D1[1] := 0.1;
> array_const_0D0 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms + 1) do # do number 2
> array_const_0D0[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_const_0D0[1] := 0.0;
> array_m1 := Array(1..(max_terms+1 + 1),[]);
> term := 1;
> while (term <= max_terms) do # do number 2
> array_m1[term] := 0.0;
> term := term + 1;
> od;# end do number 2
> ;
> array_m1[1] := -1.0;
> #END ARRAYS DEFINED AND INITIALIZATED
> #Initing Factorial Tables
> iiif := 0;
> while (iiif <= glob_max_terms) do # do number 2
> jjjf := 0;
> while (jjjf <= glob_max_terms) do # do number 3
> array_fact_1[iiif] := 0;
> array_fact_2[iiif,jjjf] := 0;
> jjjf := jjjf + 1;
> od;# end do number 3
> ;
> iiif := iiif + 1;
> od;# end do number 2
> ;
> #Done Initing Factorial Tables
> #TOP SECOND INPUT BLOCK
> #BEGIN SECOND INPUT BLOCK
> #END FIRST INPUT BLOCK
> #BEGIN SECOND INPUT BLOCK
> x_start := 0.1;
> x_end := 5.0 ;
> array_y_init[0 + 1] := exact_soln_y(x_start);
> glob_h := 0.05;
> glob_look_poles := true;
> glob_max_iter := 1000000;
> #END SECOND INPUT BLOCK
> #BEGIN OVERRIDE BLOCK
> glob_h := 0.00001 ;
> glob_look_poles := true;
> glob_max_iter := 100;
> glob_max_minutes := 1;
> #END OVERRIDE BLOCK
> #END SECOND INPUT BLOCK
> #BEGIN INITS AFTER SECOND INPUT BLOCK
> glob_last_good_h := glob_h;
> glob_max_terms := max_terms;
> glob_max_sec := convfloat(60.0) * convfloat(glob_max_minutes) + convfloat(3600.0) * convfloat(glob_max_hours);
> glob_abserr := expt(10.0 , (glob_log10_abserr));
> glob_relerr := expt(10.0 , (glob_log10_relerr));
> chk_data();
> #AFTER INITS AFTER SECOND INPUT BLOCK
> array_y_set_initial[1,1] := true;
> array_y_set_initial[1,2] := false;
> array_y_set_initial[1,3] := false;
> array_y_set_initial[1,4] := false;
> array_y_set_initial[1,5] := false;
> array_y_set_initial[1,6] := false;
> array_y_set_initial[1,7] := false;
> array_y_set_initial[1,8] := false;
> array_y_set_initial[1,9] := false;
> array_y_set_initial[1,10] := false;
> array_y_set_initial[1,11] := false;
> array_y_set_initial[1,12] := false;
> array_y_set_initial[1,13] := false;
> array_y_set_initial[1,14] := false;
> array_y_set_initial[1,15] := false;
> array_y_set_initial[1,16] := false;
> array_y_set_initial[1,17] := false;
> array_y_set_initial[1,18] := false;
> array_y_set_initial[1,19] := false;
> array_y_set_initial[1,20] := false;
> array_y_set_initial[1,21] := false;
> array_y_set_initial[1,22] := false;
> array_y_set_initial[1,23] := false;
> array_y_set_initial[1,24] := false;
> array_y_set_initial[1,25] := false;
> array_y_set_initial[1,26] := false;
> array_y_set_initial[1,27] := false;
> array_y_set_initial[1,28] := false;
> array_y_set_initial[1,29] := false;
> array_y_set_initial[1,30] := false;
> if (glob_html_log) then # if number 2
> html_log_file := fopen("html/entry.html",WRITE,TEXT);
> fi;# end if 2
> ;
> #BEGIN SOLUTION CODE
> omniout_str(ALWAYS,"START of Soultion");
> #Start Series -- INITIALIZE FOR SOLUTION
> array_x[1] := x_start;
> array_x[2] := glob_h;
> order_diff := 1;
> #Start Series array_y
> term_no := 1;
> while (term_no <= order_diff) do # do number 2
> array_y[term_no] := array_y_init[term_no] * expt(glob_h , (term_no - 1)) / factorial_1(term_no - 1);
> term_no := term_no + 1;
> od;# end do number 2
> ;
> rows := order_diff;
> r_order := 1;
> while (r_order <= rows) do # do number 2
> term_no := 1;
> while (term_no <= (rows - r_order + 1)) do # do number 3
> it := term_no + r_order - 1;
> array_y_higher[r_order,term_no] := array_y_init[it]* expt(glob_h , (term_no - 1)) / ((factorial_1(term_no - 1)));
> term_no := term_no + 1;
> od;# end do number 3
> ;
> r_order := r_order + 1;
> od;# end do number 2
> ;
> current_iter := 1;
> glob_clock_start_sec := elapsed_time_seconds();
> if (omniabs(array_y_higher[1,1]) > glob_small_float) then # if number 2
> tmp := omniabs(array_y_higher[1,1]);
> log10norm := (log10(tmp));
> if (log10norm < glob_log10normmin) then # if number 3
> glob_log10normmin := log10norm;
> fi;# end if 3
> fi;# end if 2
> ;
> display_alot(current_iter)
> ;
> glob_clock_sec := elapsed_time_seconds();
> glob_current_iter := 0;
> glob_iter := 0;
> omniout_str(DEBUGL," ");
> glob_reached_optimal_h := true;
> glob_optimal_clock_start_sec := elapsed_time_seconds();
> while ((glob_current_iter < glob_max_iter) and (array_x[1] <= x_end ) and ((convfloat(glob_clock_sec) - convfloat(glob_orig_start_sec)) < convfloat(glob_max_sec))) do # do number 2
> #left paren 0001C
> omniout_str(INFO," ");
> omniout_str(INFO,"TOP MAIN SOLVE Loop");
> glob_iter := glob_iter + 1;
> glob_clock_sec := elapsed_time_seconds();
> glob_current_iter := glob_current_iter + 1;
> atomall();
> if (glob_look_poles) then # if number 2
> #left paren 0004C
> check_for_pole();
> fi;# end if 2
> ;#was right paren 0004C
> array_x[1] := array_x[1] + glob_h;
> array_x[2] := glob_h;
> #Jump Series array_y
> order_diff := 1;
> #START PART 1 SUM AND ADJUST
> #START SUM AND ADJUST EQ =1
> #sum_and_adjust array_y
> #BEFORE ADJUST SUBSERIES EQ =1
> ord := 2;
> calc_term := 1;
> #adjust_subseriesarray_y
> iii := glob_max_terms;
> while (iii >= calc_term) do # do number 3
> array_y_higher_work[2,iii] := array_y_higher[2,iii] / expt(glob_h , (calc_term - 1)) / factorial_3(iii - calc_term , iii - 1);
> iii := iii - 1;
> od;# end do number 3
> ;
> #AFTER ADJUST SUBSERIES EQ =1
> #BEFORE SUM SUBSERIES EQ =1
> temp_sum := 0.0;
> ord := 2;
> calc_term := 1;
> #sum_subseriesarray_y
> iii := glob_max_terms;
> while (iii >= calc_term) do # do number 3
> temp_sum := temp_sum + array_y_higher_work[ord,iii];
> iii := iii - 1;
> od;# end do number 3
> ;
> array_y_higher_work2[ord,calc_term] := temp_sum * expt(glob_h , (calc_term - 1)) / (factorial_1(calc_term - 1));
> #AFTER SUM SUBSERIES EQ =1
> #BEFORE ADJUST SUBSERIES EQ =1
> ord := 1;
> calc_term := 2;
> #adjust_subseriesarray_y
> iii := glob_max_terms;
> while (iii >= calc_term) do # do number 3
> array_y_higher_work[1,iii] := array_y_higher[1,iii] / expt(glob_h , (calc_term - 1)) / factorial_3(iii - calc_term , iii - 1);
> iii := iii - 1;
> od;# end do number 3
> ;
> #AFTER ADJUST SUBSERIES EQ =1
> #BEFORE SUM SUBSERIES EQ =1
> temp_sum := 0.0;
> ord := 1;
> calc_term := 2;
> #sum_subseriesarray_y
> iii := glob_max_terms;
> while (iii >= calc_term) do # do number 3
> temp_sum := temp_sum + array_y_higher_work[ord,iii];
> iii := iii - 1;
> od;# end do number 3
> ;
> array_y_higher_work2[ord,calc_term] := temp_sum * expt(glob_h , (calc_term - 1)) / (factorial_1(calc_term - 1));
> #AFTER SUM SUBSERIES EQ =1
> #BEFORE ADJUST SUBSERIES EQ =1
> ord := 1;
> calc_term := 1;
> #adjust_subseriesarray_y
> iii := glob_max_terms;
> while (iii >= calc_term) do # do number 3
> array_y_higher_work[1,iii] := array_y_higher[1,iii] / expt(glob_h , (calc_term - 1)) / factorial_3(iii - calc_term , iii - 1);
> iii := iii - 1;
> od;# end do number 3
> ;
> #AFTER ADJUST SUBSERIES EQ =1
> #BEFORE SUM SUBSERIES EQ =1
> temp_sum := 0.0;
> ord := 1;
> calc_term := 1;
> #sum_subseriesarray_y
> iii := glob_max_terms;
> while (iii >= calc_term) do # do number 3
> temp_sum := temp_sum + array_y_higher_work[ord,iii];
> iii := iii - 1;
> od;# end do number 3
> ;
> array_y_higher_work2[ord,calc_term] := temp_sum * expt(glob_h , (calc_term - 1)) / (factorial_1(calc_term - 1));
> #AFTER SUM SUBSERIES EQ =1
> #END SUM AND ADJUST EQ =1
> #END PART 1
> #START PART 2 MOVE TERMS to REGULAR Array
> term_no := glob_max_terms;
> while (term_no >= 1) do # do number 3
> array_y[term_no] := array_y_higher_work2[1,term_no];
> ord := 1;
> while (ord <= order_diff) do # do number 4
> array_y_higher[ord,term_no] := array_y_higher_work2[ord,term_no];
> ord := ord + 1;
> od;# end do number 4
> ;
> term_no := term_no - 1;
> od;# end do number 3
> ;
> #END PART 2 HEVE MOVED TERMS to REGULAR Array
> display_alot(current_iter)
> ;
> od;# end do number 2
> ;#right paren 0001C
> omniout_str(ALWAYS,"Finished!");
> if (glob_iter >= glob_max_iter) then # if number 2
> omniout_str(ALWAYS,"Maximum Iterations Reached before Solution Completed!");
> fi;# end if 2
> ;
> if (elapsed_time_seconds() - convfloat(glob_orig_start_sec) >= convfloat(glob_max_sec )) then # if number 2
> omniout_str(ALWAYS,"Maximum Time Reached before Solution Completed!");
> fi;# end if 2
> ;
> glob_clock_sec := elapsed_time_seconds();
> omniout_str(INFO,"diff ( y , x , 1 ) = (0.1 * x + 0.2) / (0.2 * x + 0.3);");
> omniout_int(INFO,"Iterations ",32,glob_iter,4," ")
> ;
> prog_report(x_start,x_end);
> if (glob_html_log) then # if number 2
> logstart(html_log_file);
> logitem_str(html_log_file,"2012-08-21T17:38:59-05:00")
> ;
> logitem_str(html_log_file,"Maple")
> ;
> logitem_str(html_log_file,"div_lin_lin")
> ;
> logitem_str(html_log_file,"diff ( y , x , 1 ) = (0.1 * x + 0.2) / (0.2 * x + 0.3);")
> ;
> logitem_float(html_log_file,x_start)
> ;
> logitem_float(html_log_file,x_end)
> ;
> logitem_float(html_log_file,array_x[1])
> ;
> logitem_float(html_log_file,glob_h)
> ;
> logitem_integer(html_log_file,Digits)
> ;
> ;
> logitem_integer(html_log_file,glob_good_digits)
> ;
> logitem_integer(html_log_file,glob_max_terms)
> ;
> logitem_float(html_log_file,array_1st_rel_error[1])
> ;
> logitem_float(html_log_file,array_last_rel_error[1])
> ;
> logitem_integer(html_log_file,glob_iter)
> ;
> logitem_pole(html_log_file,array_type_pole[1])
> ;
> if (array_type_pole[1] = 1 or array_type_pole[1] = 2) then # if number 3
> logitem_float(html_log_file,array_pole[1])
> ;
> logitem_float(html_log_file,array_pole[2])
> ;
> 0;
> else
> logitem_str(html_log_file,"NA")
> ;
> logitem_str(html_log_file,"NA")
> ;
> 0;
> fi;# end if 3
> ;
> logitem_time(html_log_file,convfloat(glob_clock_sec))
> ;
> if (glob_percent_done < 100.0) then # if number 3
> logitem_time(html_log_file,convfloat(glob_optimal_expect_sec))
> ;
> 0;
> else
> logitem_str(html_log_file,"Done")
> ;
> 0;
> fi;# end if 3
> ;
> log_revs(html_log_file," 123 | ")
> ;
> logitem_str(html_log_file,"div_lin_lin diffeq.mxt")
> ;
> logitem_str(html_log_file,"div_lin_lin maple results")
> ;
> logitem_str(html_log_file,"c c++ Maple and Maxima")
> ;
> logend(html_log_file)
> ;
> ;
> fi;# end if 2
> ;
> if (glob_html_log) then # if number 2
> fclose(html_log_file);
> fi;# end if 2
> ;
> ;;
> #END OUTFILEMAIN
>
> # End Function number 8
> end;
main := proc()
local d1, d2, d3, d4, est_err_2, niii, done_once, term, ord, order_diff,
term_no, html_log_file, iiif, jjjf, rows, r_order, sub_iter, calc_term, iii,
temp_sum, current_iter, x_start, x_end, it, log10norm, max_terms, opt_iter,
tmp, subiter;
global DEBUGMASSIVE, DEBUGL, INFO, ALWAYS, glob_iolevel, glob_max_terms,
glob_log10abserr, glob_orig_start_sec, glob_optimal_start,
glob_max_trunc_err, glob_log10_abserr, hours_in_day, glob_start,
glob_relerr, glob_hmin, glob_optimal_done, glob_subiter_method,
glob_normmax, glob_iter, glob_current_iter, glob_no_eqs, glob_abserr,
glob_good_digits, glob_curr_iter_when_opt, glob_smallish_float,
glob_last_good_h, glob_h, glob_disp_incr, glob_reached_optimal_h, glob_dump,
glob_html_log, glob_optimal_expect_sec, glob_warned, glob_unchanged_h_cnt,
glob_hmin_init, glob_clock_sec, djd_debug2, glob_max_sec, glob_log10_relerr,
glob_not_yet_finished, sec_in_minute, glob_log10normmin, glob_log10relerr,
glob_dump_analytic, glob_hmax, glob_not_yet_start_msg, glob_small_float,
glob_clock_start_sec, glob_display_flag, glob_max_minutes, glob_warned2,
glob_optimal_clock_start_sec, glob_max_rel_trunc_err, glob_max_hours,
glob_large_float, centuries_in_millinium, years_in_century, days_in_year,
min_in_hour, djd_debug, glob_max_iter, glob_look_poles, glob_percent_done,
MAX_UNCHANGED, glob_initial_pass, glob_almost_1, glob_max_opt_iter,
array_const_1, array_const_0D3, array_const_0D2, array_const_0D1,
array_const_0D0, array_y, array_x, array_m1, array_last_rel_error,
array_1st_rel_error, array_pole, array_fact_1, array_type_pole,
array_y_init, array_tmp0, array_tmp1, array_tmp2, array_tmp3, array_tmp4,
array_tmp5, array_tmp6, array_norms, array_poles, array_y_higher,
array_y_higher_work2, array_complex_pole, array_fact_2, array_y_set_initial,
array_y_higher_work, array_real_pole, glob_last;
glob_last;
ALWAYS := 1;
INFO := 2;
DEBUGL := 3;
DEBUGMASSIVE := 4;
glob_iolevel := INFO;
DEBUGMASSIVE := 4;
DEBUGL := 3;
INFO := 2;
ALWAYS := 1;
glob_iolevel := 5;
glob_max_terms := 30;
glob_log10abserr := 0.;
glob_orig_start_sec := 0.;
glob_optimal_start := 0.;
glob_max_trunc_err := 0.1*10^(-10);
glob_log10_abserr := 0.1*10^(-10);
hours_in_day := 24;
glob_start := 0;
glob_relerr := 0.1*10^(-10);
glob_hmin := 0.1*10^(-10);
glob_optimal_done := false;
glob_subiter_method := 3;
glob_normmax := 0.;
glob_iter := 0;
glob_current_iter := 0;
glob_no_eqs := 0;
glob_abserr := 0.1*10^(-10);
glob_good_digits := 0;
glob_curr_iter_when_opt := 0;
glob_smallish_float := 0.1*10^(-100);
glob_last_good_h := 0.1;
glob_h := 0.1;
glob_disp_incr := 0.1;
glob_reached_optimal_h := false;
glob_dump := false;
glob_html_log := true;
glob_optimal_expect_sec := 0.1;
glob_warned := false;
glob_unchanged_h_cnt := 0;
glob_hmin_init := 0.001;
glob_clock_sec := 0.;
djd_debug2 := true;
glob_max_sec := 10000.0;
glob_log10_relerr := 0.1*10^(-10);
glob_not_yet_finished := true;
sec_in_minute := 60;
glob_log10normmin := 0.1;
glob_log10relerr := 0.;
glob_dump_analytic := false;
glob_hmax := 1.0;
glob_not_yet_start_msg := true;
glob_small_float := 0.1*10^(-50);
glob_clock_start_sec := 0.;
glob_display_flag := true;
glob_max_minutes := 0.;
glob_warned2 := false;
glob_optimal_clock_start_sec := 0.;
glob_max_rel_trunc_err := 0.1*10^(-10);
glob_max_hours := 0.;
glob_large_float := 0.90*10^101;
centuries_in_millinium := 10;
years_in_century := 100;
days_in_year := 365;
min_in_hour := 60;
djd_debug := true;
glob_max_iter := 1000;
glob_look_poles := false;
glob_percent_done := 0.;
MAX_UNCHANGED := 10;
glob_initial_pass := true;
glob_almost_1 := 0.9990;
glob_max_opt_iter := 10;
glob_orig_start_sec := elapsed_time_seconds();
MAX_UNCHANGED := 10;
glob_curr_iter_when_opt := 0;
glob_display_flag := true;
glob_no_eqs := 1;
glob_iter := -1;
opt_iter := -1;
glob_max_iter := 50000;
glob_max_hours := 0.;
glob_max_minutes := 15.0;
omniout_str(ALWAYS, "##############ECHO OF PROBLEM#################");
omniout_str(ALWAYS,
"##############temp/div_lin_linpostode.ode#################");
omniout_str(ALWAYS,
"diff ( y , x , 1 ) = (0.1 * x + 0.2) / (0.2 * x + 0.3);");
omniout_str(ALWAYS, "!");
omniout_str(ALWAYS, "#BEGIN FIRST INPUT BLOCK");
omniout_str(ALWAYS, "Digits := 32;");
omniout_str(ALWAYS, "max_terms := 30;");
omniout_str(ALWAYS, "!");
omniout_str(ALWAYS, "#END FIRST INPUT BLOCK");
omniout_str(ALWAYS, "#BEGIN SECOND INPUT BLOCK");
omniout_str(ALWAYS, "x_start := 0.1;");
omniout_str(ALWAYS, "x_end := 5.0 ;");
omniout_str(ALWAYS, "array_y_init[0 + 1] := exact_soln_y(x_start);");
omniout_str(ALWAYS, "glob_h := 0.05;");
omniout_str(ALWAYS, "glob_look_poles := true;");
omniout_str(ALWAYS, "glob_max_iter := 1000000;");
omniout_str(ALWAYS, "#END SECOND INPUT BLOCK");
omniout_str(ALWAYS, "#BEGIN OVERRIDE BLOCK");
omniout_str(ALWAYS, "glob_h := 0.00001 ;");
omniout_str(ALWAYS, "glob_look_poles := true;");
omniout_str(ALWAYS, "glob_max_iter := 100;");
omniout_str(ALWAYS, "glob_max_minutes := 1;");
omniout_str(ALWAYS, "#END OVERRIDE BLOCK");
omniout_str(ALWAYS, "!");
omniout_str(ALWAYS, "#BEGIN USER DEF BLOCK");
omniout_str(ALWAYS, "exact_soln_y := proc(x)");
omniout_str(ALWAYS, "return(0.5 * x + 0.25 * ln(2.0 * x + 3.0));");
omniout_str(ALWAYS, "end;");
omniout_str(ALWAYS, "#END USER DEF BLOCK");
omniout_str(ALWAYS, "#######END OF ECHO OF PROBLEM#################");
glob_unchanged_h_cnt := 0;
glob_warned := false;
glob_warned2 := false;
glob_small_float := 0.10*10^(-199);
glob_smallish_float := 0.10*10^(-63);
glob_large_float := 0.10*10^101;
glob_almost_1 := 0.99;
glob_log10_abserr := -8.0;
glob_log10_relerr := -8.0;
glob_hmax := 0.01;
Digits := 32;
max_terms := 30;
glob_max_terms := max_terms;
glob_html_log := true;
array_y := Array(0 .. max_terms + 1, []);
array_x := Array(0 .. max_terms + 1, []);
array_m1 := Array(0 .. max_terms + 1, []);
array_last_rel_error := Array(0 .. max_terms + 1, []);
array_1st_rel_error := Array(0 .. max_terms + 1, []);
array_pole := Array(0 .. max_terms + 1, []);
array_fact_1 := Array(0 .. max_terms + 1, []);
array_type_pole := Array(0 .. max_terms + 1, []);
array_y_init := Array(0 .. max_terms + 1, []);
array_tmp0 := Array(0 .. max_terms + 1, []);
array_tmp1 := Array(0 .. max_terms + 1, []);
array_tmp2 := Array(0 .. max_terms + 1, []);
array_tmp3 := Array(0 .. max_terms + 1, []);
array_tmp4 := Array(0 .. max_terms + 1, []);
array_tmp5 := Array(0 .. max_terms + 1, []);
array_tmp6 := Array(0 .. max_terms + 1, []);
array_norms := Array(0 .. max_terms + 1, []);
array_poles := Array(0 .. 2, 0 .. 4, []);
array_y_higher := Array(0 .. 3, 0 .. max_terms + 1, []);
array_y_higher_work2 := Array(0 .. 3, 0 .. max_terms + 1, []);
array_complex_pole := Array(0 .. 2, 0 .. 4, []);
array_fact_2 := Array(0 .. max_terms + 1, 0 .. max_terms + 1, []);
array_y_set_initial := Array(0 .. 3, 0 .. max_terms + 1, []);
array_y_higher_work := Array(0 .. 3, 0 .. max_terms + 1, []);
array_real_pole := Array(0 .. 2, 0 .. 4, []);
term := 1;
while term <= max_terms do array_y[term] := 0.; term := term + 1 end do
;
term := 1;
while term <= max_terms do array_x[term] := 0.; term := term + 1 end do
;
term := 1;
while term <= max_terms do array_m1[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do
array_last_rel_error[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do
array_1st_rel_error[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_pole[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_fact_1[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do
array_type_pole[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_y_init[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_tmp0[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_tmp1[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_tmp2[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_tmp3[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_tmp4[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_tmp5[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_tmp6[term] := 0.; term := term + 1
end do;
term := 1;
while term <= max_terms do array_norms[term] := 0.; term := term + 1
end do;
ord := 1;
while ord <= 1 do
term := 1;
while term <= 3 do array_poles[ord, term] := 0.; term := term + 1
end do;
ord := ord + 1
end do;
ord := 1;
while ord <= 2 do
term := 1;
while term <= max_terms do
array_y_higher[ord, term] := 0.; term := term + 1
end do;
ord := ord + 1
end do;
ord := 1;
while ord <= 2 do
term := 1;
while term <= max_terms do
array_y_higher_work2[ord, term] := 0.; term := term + 1
end do;
ord := ord + 1
end do;
ord := 1;
while ord <= 1 do
term := 1;
while term <= 3 do
array_complex_pole[ord, term] := 0.; term := term + 1
end do;
ord := ord + 1
end do;
ord := 1;
while ord <= max_terms do
term := 1;
while term <= max_terms do
array_fact_2[ord, term] := 0.; term := term + 1
end do;
ord := ord + 1
end do;
ord := 1;
while ord <= 2 do
term := 1;
while term <= max_terms do
array_y_set_initial[ord, term] := 0.; term := term + 1
end do;
ord := ord + 1
end do;
ord := 1;
while ord <= 2 do
term := 1;
while term <= max_terms do
array_y_higher_work[ord, term] := 0.; term := term + 1
end do;
ord := ord + 1
end do;
ord := 1;
while ord <= 1 do
term := 1;
while term <= 3 do
array_real_pole[ord, term] := 0.; term := term + 1
end do;
ord := ord + 1
end do;
array_x := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do array_x[term] := 0.; term := term + 1
end do;
array_y := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do array_y[term] := 0.; term := term + 1
end do;
array_tmp6 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do array_tmp6[term] := 0.; term := term + 1
end do;
array_tmp5 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do array_tmp5[term] := 0.; term := term + 1
end do;
array_tmp4 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do array_tmp4[term] := 0.; term := term + 1
end do;
array_tmp3 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do array_tmp3[term] := 0.; term := term + 1
end do;
array_tmp2 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do array_tmp2[term] := 0.; term := term + 1
end do;
array_tmp1 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do array_tmp1[term] := 0.; term := term + 1
end do;
array_tmp0 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do array_tmp0[term] := 0.; term := term + 1
end do;
array_const_1 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do
array_const_1[term] := 0.; term := term + 1
end do;
array_const_1[1] := 1;
array_const_0D3 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do
array_const_0D3[term] := 0.; term := term + 1
end do;
array_const_0D3[1] := 0.3;
array_const_0D2 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do
array_const_0D2[term] := 0.; term := term + 1
end do;
array_const_0D2[1] := 0.2;
array_const_0D1 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do
array_const_0D1[term] := 0.; term := term + 1
end do;
array_const_0D1[1] := 0.1;
array_const_0D0 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms + 1 do
array_const_0D0[term] := 0.; term := term + 1
end do;
array_const_0D0[1] := 0.;
array_m1 := Array(1 .. max_terms + 2, []);
term := 1;
while term <= max_terms do array_m1[term] := 0.; term := term + 1
end do;
array_m1[1] := -1.0;
iiif := 0;
while iiif <= glob_max_terms do
jjjf := 0;
while jjjf <= glob_max_terms do
array_fact_1[iiif] := 0;
array_fact_2[iiif, jjjf] := 0;
jjjf := jjjf + 1
end do;
iiif := iiif + 1
end do;
x_start := 0.1;
x_end := 5.0;
array_y_init[1] := exact_soln_y(x_start);
glob_h := 0.05;
glob_look_poles := true;
glob_max_iter := 1000000;
glob_h := 0.00001;
glob_look_poles := true;
glob_max_iter := 100;
glob_max_minutes := 1;
glob_last_good_h := glob_h;
glob_max_terms := max_terms;
glob_max_sec := convfloat(60.0)*convfloat(glob_max_minutes)
+ convfloat(3600.0)*convfloat(glob_max_hours);
glob_abserr := expt(10.0, glob_log10_abserr);
glob_relerr := expt(10.0, glob_log10_relerr);
chk_data();
array_y_set_initial[1, 1] := true;
array_y_set_initial[1, 2] := false;
array_y_set_initial[1, 3] := false;
array_y_set_initial[1, 4] := false;
array_y_set_initial[1, 5] := false;
array_y_set_initial[1, 6] := false;
array_y_set_initial[1, 7] := false;
array_y_set_initial[1, 8] := false;
array_y_set_initial[1, 9] := false;
array_y_set_initial[1, 10] := false;
array_y_set_initial[1, 11] := false;
array_y_set_initial[1, 12] := false;
array_y_set_initial[1, 13] := false;
array_y_set_initial[1, 14] := false;
array_y_set_initial[1, 15] := false;
array_y_set_initial[1, 16] := false;
array_y_set_initial[1, 17] := false;
array_y_set_initial[1, 18] := false;
array_y_set_initial[1, 19] := false;
array_y_set_initial[1, 20] := false;
array_y_set_initial[1, 21] := false;
array_y_set_initial[1, 22] := false;
array_y_set_initial[1, 23] := false;
array_y_set_initial[1, 24] := false;
array_y_set_initial[1, 25] := false;
array_y_set_initial[1, 26] := false;
array_y_set_initial[1, 27] := false;
array_y_set_initial[1, 28] := false;
array_y_set_initial[1, 29] := false;
array_y_set_initial[1, 30] := false;
if glob_html_log then
html_log_file := fopen("html/entry.html", WRITE, TEXT)
end if;
omniout_str(ALWAYS, "START of Soultion");
array_x[1] := x_start;
array_x[2] := glob_h;
order_diff := 1;
term_no := 1;
while term_no <= order_diff do
array_y[term_no] := array_y_init[term_no]*expt(glob_h, term_no - 1)
/factorial_1(term_no - 1);
term_no := term_no + 1
end do;
rows := order_diff;
r_order := 1;
while r_order <= rows do
term_no := 1;
while term_no <= rows - r_order + 1 do
it := term_no + r_order - 1;
array_y_higher[r_order, term_no] := array_y_init[it]*
expt(glob_h, term_no - 1)/factorial_1(term_no - 1);
term_no := term_no + 1
end do;
r_order := r_order + 1
end do;
current_iter := 1;
glob_clock_start_sec := elapsed_time_seconds();
if glob_small_float < omniabs(array_y_higher[1, 1]) then
tmp := omniabs(array_y_higher[1, 1]);
log10norm := log10(tmp);
if log10norm < glob_log10normmin then
glob_log10normmin := log10norm
end if
end if;
display_alot(current_iter);
glob_clock_sec := elapsed_time_seconds();
glob_current_iter := 0;
glob_iter := 0;
omniout_str(DEBUGL, " ");
glob_reached_optimal_h := true;
glob_optimal_clock_start_sec := elapsed_time_seconds();
while glob_current_iter < glob_max_iter and array_x[1] <= x_end and
convfloat(glob_clock_sec) - convfloat(glob_orig_start_sec) <
convfloat(glob_max_sec) do
omniout_str(INFO, " ");
omniout_str(INFO, "TOP MAIN SOLVE Loop");
glob_iter := glob_iter + 1;
glob_clock_sec := elapsed_time_seconds();
glob_current_iter := glob_current_iter + 1;
atomall();
if glob_look_poles then check_for_pole() end if;
array_x[1] := array_x[1] + glob_h;
array_x[2] := glob_h;
order_diff := 1;
ord := 2;
calc_term := 1;
iii := glob_max_terms;
while calc_term <= iii do
array_y_higher_work[2, iii] := array_y_higher[2, iii]/(
expt(glob_h, calc_term - 1)*
factorial_3(iii - calc_term, iii - 1));
iii := iii - 1
end do;
temp_sum := 0.;
ord := 2;
calc_term := 1;
iii := glob_max_terms;
while calc_term <= iii do
temp_sum := temp_sum + array_y_higher_work[ord, iii];
iii := iii - 1
end do;
array_y_higher_work2[ord, calc_term] :=
temp_sum*expt(glob_h, calc_term - 1)/factorial_1(calc_term - 1)
;
ord := 1;
calc_term := 2;
iii := glob_max_terms;
while calc_term <= iii do
array_y_higher_work[1, iii] := array_y_higher[1, iii]/(
expt(glob_h, calc_term - 1)*
factorial_3(iii - calc_term, iii - 1));
iii := iii - 1
end do;
temp_sum := 0.;
ord := 1;
calc_term := 2;
iii := glob_max_terms;
while calc_term <= iii do
temp_sum := temp_sum + array_y_higher_work[ord, iii];
iii := iii - 1
end do;
array_y_higher_work2[ord, calc_term] :=
temp_sum*expt(glob_h, calc_term - 1)/factorial_1(calc_term - 1)
;
ord := 1;
calc_term := 1;
iii := glob_max_terms;
while calc_term <= iii do
array_y_higher_work[1, iii] := array_y_higher[1, iii]/(
expt(glob_h, calc_term - 1)*
factorial_3(iii - calc_term, iii - 1));
iii := iii - 1
end do;
temp_sum := 0.;
ord := 1;
calc_term := 1;
iii := glob_max_terms;
while calc_term <= iii do
temp_sum := temp_sum + array_y_higher_work[ord, iii];
iii := iii - 1
end do;
array_y_higher_work2[ord, calc_term] :=
temp_sum*expt(glob_h, calc_term - 1)/factorial_1(calc_term - 1)
;
term_no := glob_max_terms;
while 1 <= term_no do
array_y[term_no] := array_y_higher_work2[1, term_no];
ord := 1;
while ord <= order_diff do
array_y_higher[ord, term_no] :=
array_y_higher_work2[ord, term_no];
ord := ord + 1
end do;
term_no := term_no - 1
end do;
display_alot(current_iter)
end do;
omniout_str(ALWAYS, "Finished!");
if glob_max_iter <= glob_iter then omniout_str(ALWAYS,
"Maximum Iterations Reached before Solution Completed!")
end if;
if convfloat(glob_max_sec) <=
elapsed_time_seconds() - convfloat(glob_orig_start_sec) then
omniout_str(ALWAYS,
"Maximum Time Reached before Solution Completed!")
end if;
glob_clock_sec := elapsed_time_seconds();
omniout_str(INFO,
"diff ( y , x , 1 ) = (0.1 * x + 0.2) / (0.2 * x + 0.3);");
omniout_int(INFO, "Iterations ", 32, glob_iter, 4,
" ");
prog_report(x_start, x_end);
if glob_html_log then
logstart(html_log_file);
logitem_str(html_log_file, "2012-08-21T17:38:59-05:00");
logitem_str(html_log_file, "Maple");
logitem_str(html_log_file,
"div_lin_lin");
logitem_str(html_log_file,
"diff ( y , x , 1 ) = (0.1 * x + 0.2) / (0.2 * x + 0.3);");
logitem_float(html_log_file, x_start);
logitem_float(html_log_file, x_end);
logitem_float(html_log_file, array_x[1]);
logitem_float(html_log_file, glob_h);
logitem_integer(html_log_file, Digits);
logitem_integer(html_log_file, glob_good_digits);
logitem_integer(html_log_file, glob_max_terms);
logitem_float(html_log_file, array_1st_rel_error[1]);
logitem_float(html_log_file, array_last_rel_error[1]);
logitem_integer(html_log_file, glob_iter);
logitem_pole(html_log_file, array_type_pole[1]);
if array_type_pole[1] = 1 or array_type_pole[1] = 2 then
logitem_float(html_log_file, array_pole[1]);
logitem_float(html_log_file, array_pole[2]);
0
else
logitem_str(html_log_file, "NA");
logitem_str(html_log_file, "NA");
0
end if;
logitem_time(html_log_file, convfloat(glob_clock_sec));
if glob_percent_done < 100.0 then
logitem_time(html_log_file, convfloat(glob_optimal_expect_sec))
;
0
else logitem_str(html_log_file, "Done"); 0
end if;
log_revs(html_log_file, " 123 | ");
logitem_str(html_log_file, "div_lin_lin diffeq.mxt");
logitem_str(html_log_file, "div_lin_lin maple results");
logitem_str(html_log_file, "c c++ Maple and Maxima");
logend(html_log_file)
end if;
if glob_html_log then fclose(html_log_file) end if
end proc
> main();
##############ECHO OF PROBLEM#################
##############temp/div_lin_linpostode.ode#################
diff ( y , x , 1 ) = (0.1 * x + 0.2) / (0.2 * x + 0.3);
!
#BEGIN FIRST INPUT BLOCK
Digits := 32;
max_terms := 30;
!
#END FIRST INPUT BLOCK
#BEGIN SECOND INPUT BLOCK
x_start := 0.1;
x_end := 5.0 ;
array_y_init[0 + 1] := exact_soln_y(x_start);
glob_h := 0.05;
glob_look_poles := true;
glob_max_iter := 1000000;
#END SECOND INPUT BLOCK
#BEGIN OVERRIDE BLOCK
glob_h := 0.00001 ;
glob_look_poles := true;
glob_max_iter := 100;
glob_max_minutes := 1;
#END OVERRIDE BLOCK
!
#BEGIN USER DEF BLOCK
exact_soln_y := proc(x)
return(0.5 * x + 0.25 * ln(2.0 * x + 3.0));
end;
#END USER DEF BLOCK
#######END OF ECHO OF PROBLEM#################
START of Soultion
x[1] = 0.1
y[1] (analytic) = 0.34078770245142021576704228815162
y[1] (numeric) = 0.34078770245142021576704228815162
absolute error = 0
relative error = 0 %
Correct digits = 32
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10001
y[1] (analytic) = 0.34079426494653742361199900453015
y[1] (numeric) = 0.34079426494653742361199900453006
absolute error = 9e-32
relative error = 2.6408895118619110484743282885427e-29 %
Correct digits = 30
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10002
y[1] (analytic) = 0.34080082743188912852593309117068
y[1] (numeric) = 0.34080082743188912852593309117049
absolute error = 1.9e-31
relative error = 5.5751038350390307686765254292987e-29 %
Correct digits = 30
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10003
y[1] (analytic) = 0.34080738990747545257572389205835
y[1] (numeric) = 0.34080738990747545257572389205808
absolute error = 2.7e-31
relative error = 7.9223634227327438240672719658022e-29 %
Correct digits = 30
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.074
Order of pole = 0.7253
x[1] = 0.10004
y[1] (analytic) = 0.34081395237329651782596204725605
y[1] (numeric) = 0.34081395237329651782596204725568
absolute error = 3.7e-31
relative error = 1.0856363051555346761742763891593e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.298
Order of pole = 0.5173
x[1] = 0.10005
y[1] (analytic) = 0.34082051482935244633894955012022
y[1] (numeric) = 0.34082051482935244633894955011977
absolute error = 4.5e-31
relative error = 1.3203430557145696245751149805569e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10006
y[1] (analytic) = 0.34082707727564336017469980451525
y[1] (numeric) = 0.34082707727564336017469980451472
absolute error = 5.3e-31
relative error = 1.5550407679943907082868899111357e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10007
y[1] (analytic) = 0.34083363971216938139093768202578
y[1] (numeric) = 0.34083363971216938139093768202515
absolute error = 6.3e-31
relative error = 1.8484090963909217812444127131868e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.9537
Order of pole = 0.6776
x[1] = 0.10008
y[1] (analytic) = 0.34084020213893063204309957916728
y[1] (numeric) = 0.34084020213893063204309957916658
absolute error = 7.0e-31
relative error = 2.0537483419126463397665990878969e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.8117
Order of pole = 0.6287
x[1] = 0.10009
y[1] (analytic) = 0.34084676455592723418433347459505
y[1] (numeric) = 0.34084676455592723418433347459427
absolute error = 7.8e-31
relative error = 2.2884183777311903733118617178450e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.1001
y[1] (analytic) = 0.34085332696315930986549898631115
y[1] (numeric) = 0.34085332696315930986549898631026
absolute error = 8.9e-31
relative error = 2.6110937743500285583334033676468e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10011
y[1] (analytic) = 0.3408598893606269811351674288696
y[1] (numeric) = 0.34085988936062698113516742886865
absolute error = 9.5e-31
relative error = 2.7870689091109448583187082571635e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 2.189
Order of pole = 1.436
x[1] = 0.10012
y[1] (analytic) = 0.34086645174833037003962187058008
y[1] (numeric) = 0.34086645174833037003962187057904
absolute error = 1.04e-30
relative error = 3.0510482761379409395409941524120e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10013
y[1] (analytic) = 0.34087301412626959862285719070938
y[1] (numeric) = 0.34087301412626959862285719070825
absolute error = 1.13e-30
relative error = 3.3150174791525564223152345103637e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.281
Order of pole = 0.8205
x[1] = 0.10014
y[1] (analytic) = 0.34087957649444478892658013668142
y[1] (numeric) = 0.3408795764944447889265801366802
absolute error = 1.22e-30
relative error = 3.5789765187644850585190460673860e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.138
Order of pole = 0.5037
x[1] = 0.10015
y[1] (analytic) = 0.34088613885285606299020938127535
y[1] (numeric) = 0.34088613885285606299020938127405
absolute error = 1.30e-30
relative error = 3.8135900872201396829898153915878e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.6427
Order of pole = 0.5807
x[1] = 0.10016
y[1] (analytic) = 0.34089270120150354285087557982188
y[1] (numeric) = 0.34089270120150354285087557982048
absolute error = 1.40e-30
relative error = 4.1068641102188114370445283290865e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10017
y[1] (analytic) = 0.34089926354038735054342142739775
y[1] (numeric) = 0.34089926354038735054342142739627
absolute error = 1.48e-30
relative error = 4.3414584843321610588447807793994e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 3.014
Order of pole = 2.274
x[1] = 0.10018
y[1] (analytic) = 0.3409058258695076081004017160186
y[1] (numeric) = 0.34090582586950760810040171601704
absolute error = 1.56e-30
relative error = 4.5760438268284065770123561777820e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10019
y[1] (analytic) = 0.34091238818886443755208339182985
y[1] (numeric) = 0.34091238818886443755208339182819
absolute error = 1.66e-30
relative error = 4.8692862374962009109366235864968e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
memory used=3.8MB, alloc=2.9MB, time=0.35
x[1] = 0.1002
y[1] (analytic) = 0.34091895049845796092644561229585
y[1] (numeric) = 0.34091895049845796092644561229411
absolute error = 1.74e-30
relative error = 5.1038523891263426255610473424549e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 4.576
Order of pole = 4.588
x[1] = 0.10021
y[1] (analytic) = 0.3409255127982883002491798033874
y[1] (numeric) = 0.34092551279828830024917980338556
absolute error = 1.84e-30
relative error = 5.3970733515876614356773094027695e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10022
y[1] (analytic) = 0.34093207508835557754368971676715
y[1] (numeric) = 0.34093207508835557754368971676525
absolute error = 1.90e-30
relative error = 5.5729576030873543134734978732984e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10023
y[1] (analytic) = 0.34093863736865991483109148697368
y[1] (numeric) = 0.34093863736865991483109148697168
absolute error = 2.00e-30
relative error = 5.8661582489912476524072625765022e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10024
y[1] (analytic) = 0.34094519963920143413021368860328
y[1] (numeric) = 0.34094519963920143413021368860118
absolute error = 2.10e-30
relative error = 6.1593476084200152511648196156926e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10025
y[1] (analytic) = 0.3409517618999802574575973934903
y[1] (numeric) = 0.34095176189998025745759739348812
absolute error = 2.18e-30
relative error = 6.3938663576682523991311947073203e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10026
y[1] (analytic) = 0.34095832415099650682749622788565
y[1] (numeric) = 0.34095832415099650682749622788339
absolute error = 2.26e-30
relative error = 6.6283760797672690519683833176513e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 2.074
Order of pole = 1.34
x[1] = 0.10027
y[1] (analytic) = 0.3409648863922503042518764296334
y[1] (numeric) = 0.34096488639225030425187642963106
absolute error = 2.34e-30
relative error = 6.8628767752584191231402887663416e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10028
y[1] (analytic) = 0.34097144862374177174041690534568
y[1] (numeric) = 0.34097144862374177174041690534326
absolute error = 2.42e-30
relative error = 7.0973684446830129648242288597557e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10029
y[1] (analytic) = 0.34097801084547103130050928757582
y[1] (numeric) = 0.3409780108454710313005092875733
absolute error = 2.52e-30
relative error = 7.3905058972909759112762222621844e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.1003
y[1] (analytic) = 0.34098457305743820493725799198955
y[1] (numeric) = 0.34098457305743820493725799198695
absolute error = 2.60e-30
relative error = 7.6249783874006374145915370374009e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10031
y[1] (analytic) = 0.34099113525964341465348027453468
y[1] (numeric) = 0.34099113525964341465348027453199
absolute error = 2.69e-30
relative error = 7.8887681286838536305613298545489e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10032
y[1] (analytic) = 0.3409976974520867824497062886087
y[1] (numeric) = 0.34099769745208678244970628860592
absolute error = 2.78e-30
relative error = 8.1525477173951146469917221171888e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10033
y[1] (analytic) = 0.3410042596347684303241791422248
y[1] (numeric) = 0.34100425963476843032417914222193
absolute error = 2.87e-30
relative error = 8.4163171541431908360829718612612e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10034
y[1] (analytic) = 0.34101082180768848027285495517602
y[1] (numeric) = 0.34101082180768848027285495517308
absolute error = 2.94e-30
relative error = 8.6214272744047981602115978506174e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.7995
Order of pole = 0.6248
x[1] = 0.10035
y[1] (analytic) = 0.34101738397084705428940291619768
y[1] (numeric) = 0.34101738397084705428940291619465
absolute error = 3.03e-30
relative error = 8.8851775376325949951678115019761e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10036
y[1] (analytic) = 0.34102394612424427436520534012788
y[1] (numeric) = 0.34102394612424427436520534012475
absolute error = 3.13e-30
relative error = 9.1782411046866957958409783311055e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10037
y[1] (analytic) = 0.34103050826788026248935772506632
y[1] (numeric) = 0.34103050826788026248935772506312
absolute error = 3.20e-30
relative error = 9.3833247243862197507811800323945e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.8852
Order of pole = 0.653
x[1] = 0.10038
y[1] (analytic) = 0.34103707040175514064866880953145
y[1] (numeric) = 0.34103707040175514064866880952816
absolute error = 3.29e-30
relative error = 9.6470451031151834542617545144680e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10039
y[1] (analytic) = 0.34104363252586903082766062961555
y[1] (numeric) = 0.34104363252586903082766062961218
absolute error = 3.37e-30
relative error = 9.8814335721232880379353277215642e-28 %
Correct digits = 29
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.1004
y[1] (analytic) = 0.34105019464022205500856857613828
y[1] (numeric) = 0.34105019464022205500856857613481
absolute error = 3.47e-30
relative error = 1.0174455416043801590528861507704e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.566
Order of pole = 0.9786
x[1] = 0.10041
y[1] (analytic) = 0.34105675674481433517134145179825
y[1] (numeric) = 0.34105675674481433517134145179471
absolute error = 3.54e-30
relative error = 1.0379504085440830748985852562619e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.8977
Order of pole = 0.6573
x[1] = 0.10042
y[1] (analytic) = 0.34106331883964599329364152832305
y[1] (numeric) = 0.34106331883964599329364152831942
absolute error = 3.63e-30
relative error = 1.0643185002567448067549927510725e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10043
y[1] (analytic) = 0.3410698809247171513508446036172
y[1] (numeric) = 0.34106988092471715135084460361347
absolute error = 3.73e-30
relative error = 1.0936175278471177665464340835120e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10044
y[1] (analytic) = 0.34107644300002793131604005890848
y[1] (numeric) = 0.34107644300002793131604005890468
absolute error = 3.80e-30
relative error = 1.1141197458775213073547604248768e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10045
y[1] (analytic) = 0.34108300506557845516003091589258
y[1] (numeric) = 0.34108300506557845516003091588869
absolute error = 3.89e-30
relative error = 1.1404848503818264571069462276392e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10046
y[1] (analytic) = 0.34108956712136884485133389387565
y[1] (numeric) = 0.34108956712136884485133389387169
absolute error = 3.96e-30
relative error = 1.1609853779523328128902754649525e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10047
y[1] (analytic) = 0.34109612916739922235617946691545
y[1] (numeric) = 0.34109612916739922235617946691138
absolute error = 4.07e-30
relative error = 1.1932120161945820158603381572955e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.832
Order of pole = 1.155
x[1] = 0.10048
y[1] (analytic) = 0.3411026912036697096385119209603
y[1] (numeric) = 0.34110269120366970963851192095615
absolute error = 4.15e-30
relative error = 1.2166424091688177088895709812980e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.519
Order of pole = 0.9506
x[1] = 0.10049
y[1] (analytic) = 0.34110925323018042865998941098665
y[1] (numeric) = 0.34110925323018042865998941098243
absolute error = 4.22e-30
relative error = 1.2371402886430480912448310533614e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.1005
y[1] (analytic) = 0.34111581524693150137998401813462
y[1] (numeric) = 0.34111581524693150137998401813032
absolute error = 4.30e-30
relative error = 1.2605689351832773283825189109939e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.021
Order of pole = 0.7036
x[1] = 0.10051
y[1] (analytic) = 0.34112237725392304975558180684178
y[1] (numeric) = 0.34112237725392304975558180683738
absolute error = 4.40e-30
relative error = 1.2898596789282894114266012912989e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10052
y[1] (analytic) = 0.34112893925115519574158288197518
y[1] (numeric) = 0.34112893925115519574158288197068
absolute error = 4.50e-30
relative error = 1.3191492958288384920451936367398e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10053
y[1] (analytic) = 0.3411355012386280612905014459616
y[1] (numeric) = 0.34113550123862806129050144595703
absolute error = 4.57e-30
relative error = 1.3396436264788619540162502871874e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
memory used=7.6MB, alloc=4.0MB, time=0.76
x[1] = 0.10054
y[1] (analytic) = 0.3411420632163417683525658559161
y[1] (numeric) = 0.34114206321634176835256585591143
absolute error = 4.67e-30
relative error = 1.3689311590515972587580027035103e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10055
y[1] (analytic) = 0.34114862518429643887571868076852
y[1] (numeric) = 0.34114862518429643887571868076377
absolute error = 4.75e-30
relative error = 1.3923550175334692573298302784476e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10056
y[1] (analytic) = 0.34115518714249219480561675838855
y[1] (numeric) = 0.3411551871424921948056167583837
absolute error = 4.85e-30
relative error = 1.4216404096398139706610024931571e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10057
y[1] (analytic) = 0.34116174909092915808563125270868
y[1] (numeric) = 0.34116174909092915808563125270374
absolute error = 4.94e-30
relative error = 1.4479935142680229630143975698390e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10058
y[1] (analytic) = 0.3411683110296074506568477108456
y[1] (numeric) = 0.34116831102960745065684771084059
absolute error = 5.01e-30
relative error = 1.4684833960341702143359913341651e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10059
y[1] (analytic) = 0.34117487295852719445806612021978
y[1] (numeric) = 0.34117487295852719445806612021468
absolute error = 5.10e-30
relative error = 1.4948345860804203599890267850179e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.1006
y[1] (analytic) = 0.3411814348776885114258009656731
y[1] (numeric) = 0.34118143487768851142580096566793
absolute error = 5.17e-30
relative error = 1.5153227788767034899035507272236e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10061
y[1] (analytic) = 0.34118799678709152349428128658495
y[1] (numeric) = 0.34118799678709152349428128657968
absolute error = 5.27e-30
relative error = 1.5446029900309156227839400662943e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10062
y[1] (analytic) = 0.34119455868673635259545073398628
y[1] (numeric) = 0.34119455868673635259545073398093
absolute error = 5.35e-30
relative error = 1.5680203167929291734191746150652e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10063
y[1] (analytic) = 0.34120112057662312065896762767212
y[1] (numeric) = 0.34120112057662312065896762766668
absolute error = 5.44e-30
relative error = 1.5943675656183391157558684376591e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.471
Order of pole = 0.9221
x[1] = 0.10064
y[1] (analytic) = 0.3412076824567519496122050133121
y[1] (numeric) = 0.34120768245675194961220501330659
absolute error = 5.51e-30
relative error = 1.6148522683683689105424531318295e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 2.895
Order of pole = 2.136
x[1] = 0.10065
y[1] (analytic) = 0.34121424432712296138025071955938
y[1] (numeric) = 0.34121424432712296138025071955378
absolute error = 5.60e-30
relative error = 1.6411976032956191002382865118890e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10066
y[1] (analytic) = 0.3412208061877362778859074151576
y[1] (numeric) = 0.3412208061877362778859074151519
absolute error = 5.70e-30
relative error = 1.6704725786457221362245371987341e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.245
Order of pole = 0.8026
x[1] = 0.10067
y[1] (analytic) = 0.34122736803859202104969266604615
y[1] (numeric) = 0.34122736803859202104969266604038
absolute error = 5.77e-30
relative error = 1.6909546362492900718438035494093e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10068
y[1] (analytic) = 0.3412339298796903127898389924638
y[1] (numeric) = 0.34123392987969031278983899245792
absolute error = 5.88e-30
relative error = 1.7231580699120764702524941578143e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10069
y[1] (analytic) = 0.34124049171103127502229392605015
y[1] (numeric) = 0.34124049171103127502229392604418
absolute error = 5.97e-30
relative error = 1.7494992959556235222568222585898e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.65
Order of pole = 1.032
x[1] = 0.1007
y[1] (analytic) = 0.34124705353261502966072006694572
y[1] (numeric) = 0.34124705353261502966072006693968
absolute error = 6.04e-30
relative error = 1.7699786525549358149932844196478e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.8754
Order of pole = 0.6496
x[1] = 0.10071
y[1] (analytic) = 0.3412536153444416986164951408901
y[1] (numeric) = 0.34125361534444169861649514088396
absolute error = 6.14e-30
relative error = 1.7992483372821232867339468122059e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10072
y[1] (analytic) = 0.3412601771465114037987120563181
y[1] (numeric) = 0.34126017714651140379871205631188
absolute error = 6.22e-30
relative error = 1.8226562653777210925990706032474e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10073
y[1] (analytic) = 0.34126673893882426711417896145455
y[1] (numeric) = 0.34126673893882426711417896144823
absolute error = 6.32e-30
relative error = 1.8519238117526970491919944158179e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10074
y[1] (analytic) = 0.34127330072138041046741930140688
y[1] (numeric) = 0.34127330072138041046741930140048
absolute error = 6.40e-30
relative error = 1.8753298269954719564648392190663e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 3.637
Order of pole = 3.081
x[1] = 0.10075
y[1] (analytic) = 0.34127986249417995576067187525625
y[1] (numeric) = 0.34127986249417995576067187524977
absolute error = 6.48e-30
relative error = 1.8987349422383534902021514642162e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.8039
Order of pole = 0.6261
x[1] = 0.10076
y[1] (analytic) = 0.34128642425722302489389089314672
y[1] (numeric) = 0.34128642425722302489389089314014
absolute error = 6.58e-30
relative error = 1.9279993378935992435303830374425e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10077
y[1] (analytic) = 0.34129298601050973976474603337262
y[1] (numeric) = 0.34129298601050973976474603336596
absolute error = 6.66e-30
relative error = 1.9514025406296842769623099436826e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.716
Order of pole = 1.074
x[1] = 0.10078
y[1] (analytic) = 0.3412995477540402222686224994643
y[1] (numeric) = 0.34129954775404022226862249945755
absolute error = 6.75e-30
relative error = 1.9777348210447768216668689060499e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10079
y[1] (analytic) = 0.34130610948781459429862107727188
y[1] (numeric) = 0.34130610948781459429862107726506
absolute error = 6.82e-30
relative error = 1.9982062466548052043894586108455e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 5.073
Order of pole = 5.521
x[1] = 0.1008
y[1] (analytic) = 0.34131267121183297774555819204748
y[1] (numeric) = 0.34131267121183297774555819204056
absolute error = 6.92e-30
relative error = 2.0274664797619416195442782502017e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10081
y[1] (analytic) = 0.3413192329260954944979659655253
y[1] (numeric) = 0.34131923292609549449796596551831
absolute error = 6.99e-30
relative error = 2.0479361623063055147993398349143e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.5623
Order of pole = 0.5617
x[1] = 0.10082
y[1] (analytic) = 0.3413257946306022664420922730004
y[1] (numeric) = 0.3413257946306022664420922729933
absolute error = 7.10e-30
relative error = 2.0801240667099101483434583880983e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10083
y[1] (analytic) = 0.34133235632535341546190080040515
y[1] (numeric) = 0.34133235632535341546190080039796
absolute error = 7.19e-30
relative error = 2.1064513418547958032529391689628e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 2.521
Order of pole = 1.74
x[1] = 0.10084
y[1] (analytic) = 0.3413389180103490634390711013844
y[1] (numeric) = 0.34133891801034906343907110137713
absolute error = 7.27e-30
relative error = 2.1298479652940074893294054768976e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10085
y[1] (analytic) = 0.34134547968558933225299865436852
y[1] (numeric) = 0.34134547968558933225299865436119
absolute error = 7.33e-30
relative error = 2.1473845227865932243160466118511e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10086
y[1] (analytic) = 0.34135204135107434378079491964492
y[1] (numeric) = 0.34135204135107434378079491963748
absolute error = 7.44e-30
relative error = 2.1795680408274154140502775075710e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10087
y[1] (analytic) = 0.3413586030068042198972873964274
y[1] (numeric) = 0.34135860300680421989728739641988
absolute error = 7.52e-30
relative error = 2.2029619097808721778150197879593e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 5.334
Order of pole = 6.052
x[1] = 0.10088
y[1] (analytic) = 0.34136516465277908247501967992425
y[1] (numeric) = 0.34136516465277908247501967991664
absolute error = 7.61e-30
relative error = 2.2292842937680947553807537110250e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
memory used=11.4MB, alloc=4.1MB, time=1.21
NO POLE
x[1] = 0.10089
y[1] (analytic) = 0.3413717262889990533842515184041
y[1] (numeric) = 0.3413717262889990533842515183964
absolute error = 7.70e-30
relative error = 2.2556056659130935106879990789358e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.1009
y[1] (analytic) = 0.34137828791546425449295887026025
y[1] (numeric) = 0.34137828791546425449295887025246
absolute error = 7.79e-30
relative error = 2.2819260262764699254195138252647e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.6438
Order of pole = 0.5809
x[1] = 0.10091
y[1] (analytic) = 0.3413848495321748076668339610731
y[1] (numeric) = 0.34138484953217480766683396106524
absolute error = 7.86e-30
relative error = 2.3023868841195342643019454038660e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10092
y[1] (analytic) = 0.34139141113913083476928534067092
y[1] (numeric) = 0.34139141113913083476928534066296
absolute error = 7.96e-30
relative error = 2.3316345228017401482479288804643e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.091
Order of pole = 0.7322
x[1] = 0.10093
y[1] (analytic) = 0.34139797273633245766143794018862
y[1] (numeric) = 0.34139797273633245766143794018057
absolute error = 8.05e-30
relative error = 2.3579519044822078765164653958030e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.077
Order of pole = 0.7265
x[1] = 0.10094
y[1] (analytic) = 0.341404534323779798202133129125
y[1] (numeric) = 0.34140453432377979820213312911687
absolute error = 8.13e-30
relative error = 2.3813391981167141587608229175695e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10095
y[1] (analytic) = 0.34141109590147297824792877239802
y[1] (numeric) = 0.34141109590147297824792877238982
absolute error = 8.20e-30
relative error = 2.4017965726475447158791076920978e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 0.3189
Order of pole = 0.5198
x[1] = 0.10096
y[1] (analytic) = 0.34141765746941211965309928739845
y[1] (numeric) = 0.34141765746941211965309928739015
absolute error = 8.30e-30
relative error = 2.4310400526790573573362127926749e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10097
y[1] (analytic) = 0.3414242190275973442696357010415
y[1] (numeric) = 0.34142421902759734426963570103311
absolute error = 8.39e-30
relative error = 2.4573535011357339282277527186925e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
Complex estimate of poles used
Radius of convergence = 1.676
Order of pole = 1.048
x[1] = 0.10098
y[1] (analytic) = 0.34143078057602877394724570681695
y[1] (numeric) = 0.34143078057602877394724570680846
absolute error = 8.49e-30
relative error = 2.4865947896310047149974088223430e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.10099
y[1] (analytic) = 0.34143734211470653053335372183728
y[1] (numeric) = 0.34143734211470653053335372182871
absolute error = 8.57e-30
relative error = 2.5099773641984631102111329591246e-27 %
Correct digits = 28
h = 1e-05
TOP MAIN SOLVE Loop
NO POLE
x[1] = 0.101
y[1] (analytic) = 0.3414439036436307358731009438842
y[1] (numeric) = 0.34144390364363073587310094387554
absolute error = 8.66e-30
relative error = 2.5362877789256270025244701127008e-27 %
Correct digits = 28
h = 1e-05
Finished!
Maximum Iterations Reached before Solution Completed!
diff ( y , x , 1 ) = (0.1 * x + 0.2) / (0.2 * x + 0.3);
Iterations = 100
Total Elapsed Time = 1 Seconds
Elapsed Time(since restart) = 1 Seconds
Expected Time Remaining = 1 Hours 42 Minutes 1 Seconds
Optimized Time Remaining = 1 Hours 39 Minutes 30 Seconds
Time to Timeout = 58 Seconds
Percent Done = 0.02061 %
> quit
memory used=12.7MB, alloc=4.1MB, time=1.35